Abstract:Sulfur dioxide (SO2) is one of the main air pollutants from many industries. Most coal-fired power plants in China use wet flue gas desulfurization (WFGD) as the main method for SO2 removal. Presently, the operating of WFGD lacks accurate modeling method to predict outlet concentration, let alone optimization method. As a result, operating parameters and running status of WFGD are adjusted based on the experience of the experts, which brings about the possibility of material waste and excessive emissions. In this paper, a novel WFGD model combining a mathematical model and an artificial neural network (ANN) was developed to forecast SO2 emissions. Operation data from a 1000-MW coal-fired unit was collected and divided into two separated sets for model training and validation. The hybrid model consisting a mechanism model and a 9-input ANN had the best performance on both training and validation sets in terms of RMSE (root mean square error) and MRE (mean relative error) and was chosen as the model used in optimization. A comprehensive cost model of WFGD was also constructed to estimate real-time operation cost. Based on the hybrid WFGD model and cost model, a particle swarm optimization (PSO)-based solver was designed to derive the cost-effective set points under different operation conditions. The optimization results demonstrated that the optimized operating parameters could effectively keep the SO2 emissions within the standard, whereas the SO2 emissions was decreased by 30.79% with less than 2% increase of total operating cost.Implications: Sulfur dioxide (SO2) is one of the main pollutants generated during coal combustion in power plants, and wet flue gas desulfurization (WFGD) is the main facility for SO2 removal. A hybrid model combining SO2 removal mathematical model with data-driven model achieves more accurate prediction of outlet concentration. Particle swarm optimization with a penalty function efficiently solves the optimization problem of WFGD subject to operation cost under multiple operation conditions. The proposed model and optimization method is able to direct the optimized operation of WFGD with enhanced emission and economic performance.

Predicting Acid Dew Point with A Semi-Empirical Model

Prediction of Acid Dew Point in Flue Gas of Boilers Burning Fossil Fuels

The Measurement and Correction of Correlation Formulas of Flue Gas Acid Dew Point

A Numerical Model for Predicting Particle Collection Efficiency of Electrostatic Precipitators

Comparison and Analysis on the Calculation Methods of Acid Dew Point of Flue Gas

STUDY ON PREDICTION MODEL FOR TEMPERATURE OF FLUE GAS EXHAUSTED FROM UTILITY BOILERS BASED ON PROPERTIES OF FUEL COAL

Study on Spray Condensation Performance of Desulfurization Wet Flue Gas

Heat and mass transfer model for desiccant solution regeneration process in liquid desiccant dehumidification system

Empirical Correlations to Predict the Performance of the Dehumidifier Using Liquid Desiccant in Heat and Mass Transfer

Performance evaluation of packed tower liquid desiccant dehumidifier based on LSSVM

Integrated Modeling of Semi-dry Flue Gas Desulfurization

Kinetic modelling and experimental studies on SO3 generation in flue gas for coal-fired boiler

Analytic Study on Approach to Adiabatic Saturation Temperature and the Control Scheme for the Amount of Water Sprayed in the Semi-Dry FGD Process

Factors influencing desulphurization efficiency of wet flue gas desulphurization system

A Model for Performance Optimization of Wet Flue Gas Desulfurization Systems of Power Plants

Modeling on circulating fluidized bed flue gas desulfurization

Factors Influencing Desulfurization Efficiency of Wet Flue Gas Desulfurization System

Simulation of SO2 absorption and performance enhancement of wet flue gas desulfurization system

A MODEL FOR PREDICTING HEAT TRANSFER PROCESS WITH COAL ASH DEPOSITION IN UTILITY BOILERS

Modeling and Optimization of Wet Flue Gas Desulfurization System based on a Hybrid Modeling Method.

Prediction of SO2 concentration at desulfurization outlet of thermal power units based on ReliefF-SC and ISAO-ARELM