Application of Optimized Microchannel Separator to Maximize the Reuse Efficiency of Purified Water in the Petrochemical Industry
Jian-ping Li,Min-jie Shan,Wei Zhao,Tong Zhang,Hua-lin Wang,Yun-feng Yang,Hai-tao Zhao,Ze-jin Yu
DOI: https://doi.org/10.1016/j.cherd.2022.09.050
IF: 7.8
2022-01-01
Process Safety and Environmental Protection
Abstract:In the petrochemical industry, water is purified through a steam stripping system. However, the generated water contains approximately 5-10 mg/L of suspended solids (SS), which does not meet the high-pressure air-cooled water standard (SS <= 0.2 mg/L) proposed by the American Petroleum Institute (API). Therefore, additional efforts are needed to reduce the content of SS and facilitate the recycling of water resources, in addition to saving energy and reducing emissions. This study proposed a physical separation method based on microchannel technology, after which a laboratory-scale experimental study was conducted to assess the influence of important parameters such as bed height, filler type, and particle size on the separation performance of the microchannel separator. Next, a 1 m3/h pilot-plant was established to comprehensively evaluate the removal ef-ficiency and operational stability of SS in the purified water. Our study found that in weakly alkaline purified water, when the filler bed height was greater than 1500 mm, and using 0.105-0.125 mm glass beads, the effluent SS could reach 0.2 mg/L and purified water could be stably obtained with a 95% recovery rate. Therefore, it was estimated that a 100 m3 /h industrial-scale installation could save approximately $1100,000 in salt water and effluent treatment alone, in addition to reducing the annual CO2 emissions by ap-proximately 15,000 t. This is a low-cost method that does not require any additional chemicals while delivering high-efficiency separation, which reduces the demand for fresh water by petrochemical companies, increases corporate benefits, and meets the requirements of emission reduction and environmental protection.(c) 2022 Institution of Chemical Engineers. Published by Elsevier Ltd. All rights reserved.