Abstract:The PWM voltage pulses output by the inverter reaches the stator winding of the wind turbine generator through the cable. Due to the impedance mismatch between the motor and the cable, the voltage at the motor end rises under the action of the circuit wave process; on the other hand, electromagnetic oscillation occurs within the motor winding. Higher overvoltage is generated under the combined effect of both, which greatly accelerates the aging and breakdown of the insulation layer of the permanent magnet synchronous wind turbine. In this paper, a three-dimensional electromagnetic model of the permanent magnet synchronous wind turbine generator is established. The distribution circuit parameters of the stator winding of the permanent magnet machine are calculated using the finite element method, and its circuit model is based. The voltage distribution of the stator winding under different PWM excitations is investigated by simulation software, and the effects of the time of the rising edge and the pulse width of the PWM pulse on the stator winding voltage to ground and the turn-to-turn voltage distribution are studied. The results show that the effect of the rising edge time is larger when the rising edge time is shorter, the maximum voltage to ground occurs in the first coil, and the amplitude can be up to 1.5 times of the output voltage. When the rising edge time is longer, the maximum voltage to ground occurs in the end coil, and the amplitude is slightly higher than the output voltage. The trend of turn-to-turn voltage variation is similar for different rising edges; only the maximum turn-to-turn voltage amplitude is different. Pulse width has a small effect on overvoltage and only occurs when the pulse width is less than 10 μs. The research results of this paper are of great significance in revealing the aging and breakdown mechanism of the generator stator insulation, as well as the insulation coordination and design.

Over-voltage and Its Countermeasures in PWM Inverter-Driven Systems

Study on the Over-Voltage and Over-Current of Grid-Connected Inverters in Non-Fault Conditions

Analysis Of Voltage Waveform At The Stator Terminal Of Pwm Inverter Fed Motors

Design of Over-Voltage Filter at PWM Inverter Output Terminals

Research on Side-Effects of Voltage Source PWM Inverter Drive System

Influence of Cable Insulation Structure on Terminal Over-Voltage of Inverter-Fed Motor

Overvoltage Mechanism of Converter Valves for HVDC Power Transmission Project from Tianshengqiao to Guangzhou

Investigation on Overvoltage Distribution in Stator Windings of Permanent Magnet Synchronous Wind Turbines

An Effective Method to Determine Voltage Waveform at Terminal of Induction Motor Fed by PWM Inverter

Analysis on Overvoltage in Renovated Control and Protection System for HVDC Power Transmission Project from Tianshengqiao to Guangzhou

Study On The Reliability Of Inverter-Fed Induction Motors' Insulation System

Study on the Reliability of Inverter-FedInduction Motors I nsulation System

Mechanism and Influencing Factors of Overvoltage on Inverter-Fed Traction Motor Terminal

Insulation Failure of Inverter-fed Motors and Partial Discharge Detection Technology under Repetitive Square Wave Voltage

Analysis and Compensation Method of Dead Time Effect for Space Vector PWM Inverter

Research and Realize Variable-frequency Regulating Speed System of Motor Based on Voltage Space-vector PWM

Dead-time Effects Analysis and Compensation of SPWM and SVPWM Inverter

High-Frequency Modeling and Filter Design for PWM Drives with Long Cables

On the DC Transient Overvoltage in the Converter Stations of ±800 Kv Xiluodu Zhexi HVDC Project

Modeling and suppression of PWM inverter's adverse effects

Research on Overvoltage Suppression by Blocking Diode and DC Circuit Breaker in LCC-VSC Hybrid HVDC System.