Abstract:The ejector refrigeration cycle (ERC) is often used as the sub-cycle of power and cooling cogeneration systems due to its advantages of simple structure design, few moving parts, less system investment, good stability and reliable operation. Considering the potential of organic Rankine cycle (ORC) in the utilization of low-grade heat, and the advantages of simple structure and many choices for working fluid, a novel power and cooling cogeneration system was designed, based on dual-pressure evaporation ORC (DORC) and ERC. In this system, a common condenser was used by DORC and ERC, and a part of working fluid separated from low-pressure steam generator outlet in DORC was used as the primary flow of ejector to drive ERC. A mathematical model for calculating the thermodynamic and thermoeconomic performances of the system was established. Sensitivity analysis was performed to determine the key parameters of the system, the results showed that the low-pressure evaporation temperature (TLPSG,out), high-pressure evaporation temperature (THP,E), vapor fraction of the low-pressure steam generator outlet (xLPSG,out) and working fluid mass flow ratio of high-pressure stage to low-pressure stage (k) were the four key parameters of the system. Parametric analysis showed that higher TLPSG,out and lower xLPSG,out were beneficial to increase the cooling output and thermal efficiency, while higher THP,E and larger k were helpful to increase the net power output and exergy efficiency. The net power output and exergy efficiency can be optimized by TLPSG,out and xLPSG,out. Using genetic algorithm (GA), multi-objective function optimization was carried out with THP,E, TLPSG,out, xLPSG,out and k as the decision variables. Moreover, the system's adaptability for working fluids R245fa, R236ea, R600, R600a, R601 and R601a was investigated. According to the optimization results, R236ea was the most suitable working fluid. When THP,E was 402.43K, TLPSG,out was 392.42K, xLPSG,out was 0.357 and k was 0.321, the calculated net power output , cooling output, thermal efficiency, exergy efficiency and total cost of unit exergy product (SUCP) were 273.00kW, 121.80kW, 14.52%, 44.03% and 42.62$/MWh, respectively. Exergy analysis was conducted using R236ea as working fluid. The results showed that the two steam generators and condenser were the main components responsible for most of the exergy destruction of the system in both basic case and optimized case. Compared to the basic case, the exergy destruction of the steam generators decreased by about 32.3%, and the total exergy destruction of the system decreased by about 5.0% in optimized case.

Peaking capability and economic analysis for a 330 MW cogeneration unit

Parameters analysis of 600 MW + 120 MW peak load unit by integrated generate technology

ANALYSIS ON THE PERFORMANCE OF COMPOSITE HEAT-ACCUMULATION AND POWER-GENERATION TECHNOLOGY IN THERMAL POWER PLANT

Analysis of heating load distribution and operation optimization for 350MW high back pressure double extraction series units

Experimental Study on Peak-shaving Ability of a 330MW Thermal Power Unit in Heating State

Design and Performance Analysis of Thermal Power Coupled Thermal Energy Storage with Integrated Steam Ejector

Performance Analysis of a 300 MW Coal-Fired Power Unit during the Transient Processes for Peak Shaving

Probing of operation economy for coal-fired unit under low loads with two fixed boundary conditions

Study on an on-line monitoring method for peak shaving capacity of thermal power unit

Evaluation of Combined Heat and Power Plants with Electricity Regulation

Exhaust heat utilization in large scale cogeneration units

Configuration Method for Combined Heat and Power Plants with Flexible Electricity Regulation

Economic Research of Coal-Fired Power Plant Deep Peak Regulation Based on LCOE Model

ANALYSIS OF THERMAL ECONOMIC BEHAVIOR FOR ADOPTING COOL- ELETRICITY CO- GENERATION TO 300 MW EXTRACTION CONDENSING UNIT

Peak-Shaving of the Oxy-Fuel Power Plant Coupled with Liquid O2 Storage

Modeling and thermal economy analysis of the coupled system of compressed steam energy storage and Rankine cycle in thermal power plant

Thermodynamic analysis of the coal-fired combined heat and power units integrated with steam ejectors and thermal storage

Evaluation and incentive mechanism of peaking capability of hydroelectric/thermoelectric generators

Performance and economic analysis of steam extraction for energy storage to molten salt with coupled ejector and thermal power units

Thermodynamic and thermoeconomic performance analyses and optimization of a novel power and cooling cogeneration system fueled by low-grade waste heat

Economic analysis of peak-shaving sliding pressure operation of 300 MW unit in Shajiao A Power Station