Abstract:Tire as the only contact part between automobiles and road surface plays an important role in noise, vibration, and harshness (NVH) performance of automobiles. Free vibration characteristics of a nonrotating tire have been extensively studied, but the vibration behaviour of a rolling tire still needs further investigation, especially the high‐order vibration higher than 300 Hz. Since the modal characteristics are highly dependent on the stresses induced from external loading and rolling speed, a finite element (FE) model was established for investigating rolling tire natural frequencies and mode shapes including high‐order vibration. The effects of the vertical load and rolling speed are incorporated in the analysis through an explicit dynamic simulation to determine the stress state throughout the tire at instants when the modal characteristics are desired. The contact features between the tire and road obtained from the numerical FE method are verified by a vertical loading test experimentally, and then the FE model of a free tire in a frequency range of 0–500 Hz is validated by the hammering test. A great agreement between the FE model and experimental results of tire is found. A new naming convention combining wave numbers and travelling wave direction is developed to identify and categorize modes of the static and rolling tires, respectively, based on travelling wave vibration theory. The influences of vertical load and rolling speed on tire natural frequencies are examined by the FE model, and the results show that the mode frequencies of rolling tire diverged to two different frequencies with one being lower and the other being higher than the corresponding frequency of static tire alone. This study provides deeper understanding of complex dynamic properties, which are beneficial to designing and optimizing of tire‐vehicle systems and identification of the critical rolling speeds.

Analysis of Structural Vibration Noise Characteristics of Rolling Tire

Analysis of Stochastic Dynamic Pressure of Vehicle on Rough Pavement

Simulation of Rolling Noise of Truck Tires

Finite Element Analysis on Tire Vibration and Study on Its Key Influencing Factors

NUMERICAL SIMULATION OF TIRE VIBRATION NOISE

Investigation of Multi-Degree of Freedom Damped Dynamic Absorber Applied to Wheel Noise Control

The Numerical Analysis of Sound and Vibration from a Tire by FEM and BEM

Relationship between Tire Ground Characteristics and Vibration Noise

Modeling and Validation of a Passenger Car Tire Using Finite Element Analysis

Analysis of Vibration Characteristics and Influencing Factors of Complex Tread Pattern Tires Based on Finite Element Method

Investigation of Frequency Split Phenomenon of Rolling Tire Vibration Property Using a New Naming Convention

An Improved Structural-Acoustic Coupling Model for Tire Cavity Noise

Simulation of the Tire Rolling Impact Noise Based on Mixed Lagrange-euler Method

Experimental and numerical investigation on the effect of material models of tire tread composites in rolling tire noise via coupled acoustic-structural finite element analysis

An Analysis Study on the Effects of Tire Wear on the Interior Vibration and Noise of Vehicles

Simulation study on vibration reduction characteristics of two-degree of freedom suspension system in a quarter vehicle

Numberical Analysis on the Steady-State Rolling of Load-Carrying Tire

Numerical Method of Evaluating Noise from Vibrating Tyre

FEM ANALYSIS ON STANDING WAVES AND CRITICAL SPEED IN RADIAL TIRE CORD

Simulation of Rolling Noise Based on the Mixed Lagrangian–Eulerian Method

Modeling of Tire Rolling Contact Response by REF Model