Abstract:Electroplating sludge is extensively produced in chemical precipitation-based treatment of electroplating wastewater. It poses a huge threat to environmental safety if not properly disposed, ascribed to its high contents of heavy metals. An innovative metallurgical approach was proposed a to recycle Cu, Cr, and Ni from it. Ammonia leaching was firstly performed to selectively leach Cu from Cr, in which the Cu oxide and sulfide were leached into the leachate while the Cr oxide and Ni carbide (NiCx) retained in the residue. (NH4)2SO4 increased the Cu leaching rate via increasing the dissolved oxygen amount in the ammonia leachate and converting CuS to Cu2+. Under the optimal conditions, the leaching efficiency of Cu achieved 96.5 % while that of Cr was only 0.1 %. In the followed aluminothermic reduction, C in the leaching residue could be effectively removed via a thermal oxidation, which in turn decreased the formation of a C-containing compound of high melting point and benefited the Cr and Ni recovery. Cr and Ni from the residue were reduced and recovered in a Cr-Ni alloy, and the reductant of Al first changed to a refractory Al2O3 and then transformed to a low melting point 12CaO·7Al2O3 with the additive of CaO. This transformation increased the molten slag fluidity and promoted the separation of Cr-Ni alloy from slag. Moreover, the excessive Al increased the Cr and Ni yields and concentrated all of them to be together. Partial Al was used as reductant, and the other Al transferred into Cr-Ni alloy to decrease its melting point. Cr and Ni contents in the smelting slag could be decreased to 0.11 wt% and 0.12 wt% respectively, showing an efficient recovery. This work provided a high efficiency method to recover Cu, Cr, and Ni from waste electroplating sludge.

Valuable metals separation from copper anode slime by low-temperature alkaline smelting process

Recovery of valuable metals from electroplating sludge with reducing additives via vitrification

Leaching Behavior of the Main Metals of Decopperized Anode Slime

An environmentally-friendly method to recover silver, copper and lead from copper anode slime by carbothermal reduction and super-gravity

An effective separation process of arsenic, lead, and zinc from high arsenic-containing copper smelting ashes by alkali leaching followed by sulfide precipitation

One step to direct extracted gold and silver from industrial Cu-Ag-Sb-Au alloy by a convenient bimetallic electrolytic separation process

Separation and Extraction of Valuable Metals from Electroplating Sludge by Carbothermal Reduction and Low-Carbon Reduction Refining

Recovery of copper from refining slags of copper fire anode furnace by waste acid leaching and CaO roasting process

Recovery of valuable metals from copper slag

Occurrence Behaviors of As/Sb/Bi in Copper Anode Slime and Their Separation by Compound Leaching Followed by Stepwise Precipitation

Separation and Enrichment of Au and Ag from Lead Anode Slime by a Selective Oxidation–Vacuum Volatilization–Carbon Reduction Process

Characteristics Research and Selective Leaching of Anode Slime with High Content of Copper and Stannum

Separation and recovery of copper in Cu−As-bearing copper electrorefining black slime by oxidation acid leaching and sulfide precipitation

Recovery of Cu and Ni in Electroplating Sludge by a Low-Temperature Alkaline Smelting Technique

Pressure leaching of selenium and tellurium from scrap copper anode slimes in sulfuric acid-oxygen media

A green and economical process for resource recovery from precious metals enriched residue of copper anode slime

A metallurgical approach for separation and recovery of Cu, Cr, and Ni from electroplating sludge

Study on Hydrometallurgical Process for Copper Anode Mud(Ⅲ).——Extraction of Silver

Selective Separation and Recovery of Valuable Metals Through Directional Vulcanization of Black Copper Sludge

Study on Hydrometallurgical Processing for Copper-bearing Anode Mud(I).Selective Leaching of Cu,Se and Te

An environmentally friendly system for high efficient silver recovery from anode slime