Abstract:Electroplating sludge is extensively produced in chemical precipitation-based treatment of electroplating wastewater. It poses a huge threat to environmental safety if not properly disposed, ascribed to its high contents of heavy metals. An innovative metallurgical approach was proposed a to recycle Cu, Cr, and Ni from it. Ammonia leaching was firstly performed to selectively leach Cu from Cr, in which the Cu oxide and sulfide were leached into the leachate while the Cr oxide and Ni carbide (NiCx) retained in the residue. (NH4)2SO4 increased the Cu leaching rate via increasing the dissolved oxygen amount in the ammonia leachate and converting CuS to Cu2+. Under the optimal conditions, the leaching efficiency of Cu achieved 96.5 % while that of Cr was only 0.1 %. In the followed aluminothermic reduction, C in the leaching residue could be effectively removed via a thermal oxidation, which in turn decreased the formation of a C-containing compound of high melting point and benefited the Cr and Ni recovery. Cr and Ni from the residue were reduced and recovered in a Cr-Ni alloy, and the reductant of Al first changed to a refractory Al2O3 and then transformed to a low melting point 12CaO·7Al2O3 with the additive of CaO. This transformation increased the molten slag fluidity and promoted the separation of Cr-Ni alloy from slag. Moreover, the excessive Al increased the Cr and Ni yields and concentrated all of them to be together. Partial Al was used as reductant, and the other Al transferred into Cr-Ni alloy to decrease its melting point. Cr and Ni contents in the smelting slag could be decreased to 0.11 wt% and 0.12 wt% respectively, showing an efficient recovery. This work provided a high efficiency method to recover Cu, Cr, and Ni from waste electroplating sludge.

One step to direct extracted gold and silver from industrial Cu-Ag-Sb-Au alloy by a convenient bimetallic electrolytic separation process

Separation and Enrichment of Au and Ag from Lead Anode Slime by a Selective Oxidation–Vacuum Volatilization–Carbon Reduction Process

Recovery of Silver and Gold from Copper Anode Slimes

Selective Separation of Base Metals and High-Efficiency Enrichment of Precious Metals from Scrap Copper Anode Slime

Practice of separating precious metals from base metals in gold-antimony alloy by selective chlorination leaching under controlling potential

Comprehensive Recoveries of Selenium, Copper, Gold, Silver and Lead from a Copper Anode Slime with a Clean and Economical Hydrometallurgical Process

A Novel Process for Silver Enrichment from Kaldo Smelting Slag of Copper Anode Slime by Reduction Smelting and Vacuum Metallurgy

A Green Process for Simultaneously Efficient Base Metals Removal and Precious Metals Enrichment from Copper Anode Slime

Eco-friendly and Efficient Extraction of Valuable Elements from Copper Anode Mud Using an Integrated Pyro-Hydrometallurgical Process

Reductive alkali-fusion of silver separated residue derived from copper anode slime

An integrated and sustainable hydrometallurgical process for enrichment of precious metals and selective separation of copper, zinc, and lead from a roasted sand

Electrorefining and electrodeposition for metal separation and purification from polymetallic concentrates after waste printed circuit board smelting

Research development of lead anode slime treatment technology

Pretreatment Process for Leaching Precious Metals from Decopperized Anode Slime

Recovery of valuable metals from mining and mineral processing waste

A metallurgical approach for separation and recovery of Cu, Cr, and Ni from electroplating sludge

A green and economical process for resource recovery from precious metals enriched residue of copper anode slime

Behaviors of Precious Metals in Process of Copper Anode Slime Treatment

Metal Values Separation from Residue Generated in Alkali Fusion-Leaching of Copper Anode Slime

Separation and Extraction of Valuable Metals from Electroplating Sludge by Carbothermal Reduction and Low-Carbon Reduction Refining

Electrorefining of a Gold-Bearing Antimony Alloy in Alkaline Xylitol Solution