Abstract:Electroplating sludge is extensively produced in chemical precipitation-based treatment of electroplating wastewater. It poses a huge threat to environmental safety if not properly disposed, ascribed to its high contents of heavy metals. An innovative metallurgical approach was proposed a to recycle Cu, Cr, and Ni from it. Ammonia leaching was firstly performed to selectively leach Cu from Cr, in which the Cu oxide and sulfide were leached into the leachate while the Cr oxide and Ni carbide (NiCx) retained in the residue. (NH4)2SO4 increased the Cu leaching rate via increasing the dissolved oxygen amount in the ammonia leachate and converting CuS to Cu2+. Under the optimal conditions, the leaching efficiency of Cu achieved 96.5 % while that of Cr was only 0.1 %. In the followed aluminothermic reduction, C in the leaching residue could be effectively removed via a thermal oxidation, which in turn decreased the formation of a C-containing compound of high melting point and benefited the Cr and Ni recovery. Cr and Ni from the residue were reduced and recovered in a Cr-Ni alloy, and the reductant of Al first changed to a refractory Al2O3 and then transformed to a low melting point 12CaO·7Al2O3 with the additive of CaO. This transformation increased the molten slag fluidity and promoted the separation of Cr-Ni alloy from slag. Moreover, the excessive Al increased the Cr and Ni yields and concentrated all of them to be together. Partial Al was used as reductant, and the other Al transferred into Cr-Ni alloy to decrease its melting point. Cr and Ni contents in the smelting slag could be decreased to 0.11 wt% and 0.12 wt% respectively, showing an efficient recovery. This work provided a high efficiency method to recover Cu, Cr, and Ni from waste electroplating sludge.

Leaching Behavior of the Main Metals of Decopperized Anode Slime

Characteristics Research and Selective Leaching of Anode Slime with High Content of Copper and Stannum

Occurrence Behaviors of As/Sb/Bi in Copper Anode Slime and Their Separation by Compound Leaching Followed by Stepwise Precipitation

An environmentally-friendly method to recover silver, copper and lead from copper anode slime by carbothermal reduction and super-gravity

Using Electrode Electrolytes to Enhance Electrokinetic Removal of Heavy Metals from Electroplating Sludge

Bioleaching of Copper-Containing Electroplating Sludge

Removal of Heavy Metals from Electroplating Sludge by Electrokinetic Enhancement Technology

An environmentally friendly system for high efficient silver recovery from anode slime

One step to direct extracted gold and silver from industrial Cu-Ag-Sb-Au alloy by a convenient bimetallic electrolytic separation process

Research on Classified Treatment of Electrolytic Zn Anode Slime Based on μ-XRF and Cluster Heatmap

Pressure leaching of selenium and tellurium from scrap copper anode slimes in sulfuric acid-oxygen media

Electrokinetic Gathering and Removal of Heavy Metals from Sewage Sludge by Ethylenediamine Chelation

An integrated and sustainable hydrometallurgical process for enrichment of precious metals and selective separation of copper, zinc, and lead from a roasted sand

Selective recovery of copper from electroplating sludge by integrated EDTA mixed with citric acid leaching and electrodeposition

Separation and Enrichment of Au and Ag from Lead Anode Slime by a Selective Oxidation–Vacuum Volatilization–Carbon Reduction Process

A metallurgical approach for separation and recovery of Cu, Cr, and Ni from electroplating sludge

Recovery of Copper, Lead, Zinc, and Arsenic from Copper Smelting Dust by Oxidative Alkaline Leaching and Sulfide Precipitation

Leaching behavior and occurrence of metal elements in copper slag: The key to recycling metals in copper slag

A green and economical process for resource recovery from precious metals enriched residue of copper anode slime

Leaching kinetics of copper and valuable metal extraction from copper-cadmium residues of zinc hydrometallurgy by oxidation acid leaching

Bioleaching of Iron, Copper, Lead, and Zinc from the Sludge Mining Sediment at Different Particle Sizes, pH, and Pulp Density Using Acidithiobacillus ferrooxidans