Alkali circulating leaching of arsenic from copper smelter dust based on arsenic-alkali efficient separation

Jia Tian,Xingfei Zhang,Yufeng Wang,Haisheng Han,Wei Sun,Tong Yue,Jingtao Sun

DOI: https://doi.org/10.1016/j.jenvman.2021.112348

IF: 8.7

2021-06-01

Journal of Environmental Management

Abstract:<p>Leaching arsenic from solid waste selectively and removing arsenic from alkaline leachate efficiently are two key points in alkali treatment of copper smelter dust, and the latter is challenging. In this study, composite salt precipitation of magnesium ammonium arsenate (NH₄MgAsO₄·6H₂O), similar to magnesium ammonium phosphate (NH₄MgPO₄·6H₂O), was proposed to solve the difficult problem of separation arsenic from alkali. Based on the thermodynamic analysis, the selective leaching of arsenic from copper smelting dust was carried out in the NaOH-Na₂S system. In the alkali leaching system, more than 80% arsenic can be leached out from the dust with the diffusion-controlled type in the Avrami model, while the leaching rates of valuable metals are less than 0.5%. For the strong alkaline leachate containing arsenic obtained by alkali leaching, the selective removal of arsenic was achieved by adding magnesium salt and ammonium salt. With the change of the amount of magnesium salt and ammonium salt, the sedimentation performance and composition of the arsenic slag changed accordingly. At the mole ratio of NH₄⁺: As = 8:1 and Mg²⁺: As = 1.5:1, 96.38% of arsenic was removed, and the content of arsenic in the arsenic slag composed of MgNH₄AsO₄·6H₂O reached 28.96%. On this basis, the circulating alkali leaching of copper smelter dust based on arsenic-alkali separation was successfully carried out. The whole scheme is not only economical and safe, but also achieves the reuse of wastewater without secondary pollution, which provides an alternative solution for the treatment of arsenic containing solid waste.</p>

environmental sciences