Abstract:The paper describes physical and numerical simulations of a manufacturing process composed of hot forging and controlled cooling, which replace the conventional heat treatment technology. The objective was to investigate possibilities and limitations of the heat treatment with the use of the heat of forging. Three steels used to manufacture automotive parts were investigated. Experiments were composed of two sets of tests. The first were isothermal (TTT) and constant cooling rate (CCT) dilatometric tests, which supplied data for the identification of the numerical phase transformation model. The second was a physical simulation of the sequence forging-cooling on Gleeble 3800, which supplied data for the validation of the models. In the numerical part, a finite element (FE) thermal-mechanical code was combined with metallurgical models describing recrystallization and grain growth during forging and phase transformations during cooling. The FE model predicted distributions of the temperature and the austenite grain size in the forging, which were input data for further simulations of phase transformations during cooling. A modified JMAK equation was used to calculate the kinetics of transformation and volume fraction of microstructural constituents after cooling. Since the dilatometric tests were performed for various austenitization temperatures before cooling, it was possible to include austenite grain size as a variable in the model. An inverse algorithm developed by the authors was applied in the identification procedure. The model with optimal material parameters was used for simulations of hot forging and controlled cooling in one of the forging shops in Poland. Distributions of microstructural constituents in the forging after cooling were calculated. As a consequence, various cooling sequences during heat treatment could be analyzed and compared.

Numerical Simulation Research on Semi-closed Die Warm Forging Process of Spur Gear

Numerical Simulation Analysis for Closed-die Forging Process of Hub Bearing Rings

Numerical Simulation of Pre-forging for Connecting Rod of Automobile Engine and Optimization of Its Pre-forging Billet

Numerical Simulation of Cylindrical Bevel Gear Cold Forging with Shape Similarity Method

Numerical simulation of microstructure evolution of flange axle during hot forging

Numerical Model Simulation of the Double-Roll Rotary Forging of Large Diameter Thin-Walled Disk

Simulation study of the punching forming process and die wear of spur gears

SIMULATION ANALYSIS OF WHEEL BEARING FORGING PROCESS BASED ON DEFORM

Hot Precision Forging Process and Experiment Research of Driven Spiral Bevel Gear

3D FE modeling simulation of the double-roll hot rotary forging of large diameter thin-walled metal disk

Numerical Simulation of Influence of Roller Working Surface on Spin-Forming of Rectangular Inner Meshing Gear

Research on Hot Forging Process of C-Grade Steel Train Wheel by Fem

The Numerical Simulation about Cold Extrusion of Automotive Wheel Hub Bearing Rings

Numerical Simulation of Recrystallization and Grain Growth Evolutions During Metal Forming Processes

NUMERICAL SIMULATION AND EXPERIMENTATION CUP-SHAPED THIN-WALLED INNER RECTANGULAR GEAR FORMED BY SPINNING

Numerical Study On Temperature Field And Spool Deformation Of Throttle Slide Valve With V-Notches

Progress and Prospects of FE Simulation of Two-roll Cross Piercing Process

Physical and Numerical Simulations of Closed Die Hot Forging and Heat Treatment of Forged Parts

On the effect of deformation conditions on the metal flow behavior during upsetting process using finite element simulation DEFORM 3D software

Numerical Simulation Research on Final Forging Process of 700MW Class Heavy Hydro-generator Shaft

Parametric Modeling and Simulation of the Gear Shaping Process of Floating Support Friction Disk