Abstract:The paper describes physical and numerical simulations of a manufacturing process composed of hot forging and controlled cooling, which replace the conventional heat treatment technology. The objective was to investigate possibilities and limitations of the heat treatment with the use of the heat of forging. Three steels used to manufacture automotive parts were investigated. Experiments were composed of two sets of tests. The first were isothermal (TTT) and constant cooling rate (CCT) dilatometric tests, which supplied data for the identification of the numerical phase transformation model. The second was a physical simulation of the sequence forging-cooling on Gleeble 3800, which supplied data for the validation of the models. In the numerical part, a finite element (FE) thermal-mechanical code was combined with metallurgical models describing recrystallization and grain growth during forging and phase transformations during cooling. The FE model predicted distributions of the temperature and the austenite grain size in the forging, which were input data for further simulations of phase transformations during cooling. A modified JMAK equation was used to calculate the kinetics of transformation and volume fraction of microstructural constituents after cooling. Since the dilatometric tests were performed for various austenitization temperatures before cooling, it was possible to include austenite grain size as a variable in the model. An inverse algorithm developed by the authors was applied in the identification procedure. The model with optimal material parameters was used for simulations of hot forging and controlled cooling in one of the forging shops in Poland. Distributions of microstructural constituents in the forging after cooling were calculated. As a consequence, various cooling sequences during heat treatment could be analyzed and compared.

Numerical simulation of microstructure evolution of flange axle during hot forging

NUMERICAL SIMULATION OF DYNAMIC DECRYSTALLIZATION DURING HOT FORGING

Microstructure simulation and experiment investigation of dynamic recrystallization for ultra high strength steel during hot forging

Numerical Simulation of Recrystallization and Grain Growth Evolutions During Metal Forming Processes

Numerical simulation and experimental validation of microstructure evolution during the upsetting process of a large size martensitic stainless steel forging

Numerical Simulation of Pre-forging for Connecting Rod of Automobile Engine and Optimization of Its Pre-forging Billet

Numerical Simulation and Experimental Verification of Microstructure Evolution in A 3-Dimensional Hot-Upsetting Process

Physical and Numerical Simulations of Closed Die Hot Forging and Heat Treatment of Forged Parts

Prediction of microstructure evolution of Al–1% Mg alloy during hot forming and sequential heat treatment

Modelling of Dynamic Recrystallization in Hot Working

Numerical Simulation Analysis for Closed-die Forging Process of Hub Bearing Rings

Numerical simulation and experiment on hot forging of high-Mn steel turnout core

Research on Hot Forging Process of C-Grade Steel Train Wheel by Fem

Prediction of Microstructure Evolution in Ball Mill Liner Forging Process

SIMULATION ANALYSIS OF WHEEL BEARING FORGING PROCESS BASED ON DEFORM

Microstructure evolution, constitutive modeling and forming simulation of AA6063 aluminum alloy in hot deformation

Multi-Scale Modeling of Microstructure Evolution during Multi-Pass Hot-Rolling and Cooling Process

The Numerical Simulation about Cold Extrusion of Automotive Wheel Hub Bearing Rings

3D FE modeling simulation of the double-roll hot rotary forging of large diameter thin-walled metal disk

Numerical Simulation of Microstructure Evolution of Heavy Steel Casting in Casting and Heat Treatment Processes

Model of Metal Microstructure Evolution Considering Shear Effect and Its Simulation Application in Rolling of Heavy Cylinders