Abstract:Metal flow and penetration fracture behavior is important for application of piercing extrusion process of solid ingots for high-performance seamless tube. A piercing extrusion process from a solid ingot (Phi 200 mm) to a titanium alloy tube (Phi 80 mmx10 mm) has been studied. Based on FE software of DEFORM-2D, a thermo-mechanical coupling model being able to describe the metal flow and penetration fracture behavior was developed for the piercing process of piercing extrusion of solid ingots. The piercing processes by two kinds of piercing punches were analyzed. The results indicate that at the initial stage of piercing process, the deformation characteristic is similar to forward extrusion, and then metal reverse flows, and the backward extrusion remains until the end cap is removed; the piercing force increases rapidly under forward extrusion, and backward extrusion occurs when the force rises to the stable value, and the piercing force decreases rapidly at the penetration fracture stage after removing the end cap; under backward extrusion, the piercing force has a little change by a cylindrical piercing punch, but the force will significantly increase again after a short stable stage by a bottle piercing punch, and thus the piercing force by the bottle piercing punch is much greater than that by the cylindrical piercing punch; at the penetration fracture stage, fracture behavior by the cylindrical piercing punch is similar to that in blanking process, but the fracture face by the bottle piercing punch presents an approximate L-shape.

Progress and Prospects of FE Simulation of Two-roll Cross Piercing Process

3 D FEM Simulation of the Cross-Shaft Multi-Stage Forging Processes

Three-dimensional rigid–plastic finite element simulation for the two-roll cross-wedge rolling process

3D FEM simulation of multi-stage forging process using solid modeling of forging tools

Finite Element Simulation of Rail Wheel Rolling Process

Numerical Simulation Research on A New Spinning Process: Double-Roller Clamping Spinning Process

Whole process simulation of roll forming using dynamic explicit finite element method

Finite Element Analysis Of Piercing Process Of Piercing Extrusion For Titanium Alloy Solid Ingots

Finite Element Simulation of Two Stroke Deep Drawing in Sheet Metal Forming

Simulation of Roll Forming with Dynamic Explicit Finite Element Method

Dynamic Explicit FE Simulation of Binder Wrap and Stamping Processes

Numerical Analysis of the Roller Hemming Process

The Simulation of Roll Forming with Multiple Passes

Numerical Simulation of Double Rollers Clamping Spinning Process for Flanging

The Upper Beam Tryout Process Combined with Finite Element Simulation and Experiment

FEM Simulation of Main Deformation During Cage Roll-Forming Process

Finite element simulation and experimental study of non-blank holder forward and backward composite deep drawing earing test

Process Evaluation and Optimization Based on Numerical Simulation

Finite-element Modelling of a Novel Flanging Process on a Cylinder with a Large Diameter–thickness Ratio

Finite Element Simulation and Quality Control of Hydropiercing Process

Numerical Simulation of Sheet Flexible - Die Forming Process