Abstract:Over the past few years, a number of implicit/explicit finite element models have been introduced for the purpose of tackling the problems of wheel-rail interaction. Yet, most of those finite element models encounter common numerical difficulties. For instance, initial gaps/penetrations between two contact bodies, which easily occur when realistic wheel-rail profiles are accounted for, would trigger the problems of divergence in implicit finite element simulations. Also, redundant, insufficient or mismatched mesh refinements in the vicinity of areas in contact can lead to either prohibitive calculation expenses or inaccurate implicit/explicit finite element solutions. To address the abovementioned problems and to improve the performance of finite element simulations, a novel modelling strategy has been proposed. In this strategy, the three-dimensional explicit finite element analysis is seamlessly coupled with the two-dimensional geometrical contact analysis. The contact properties in the three-dimensional finite element analyses, such as the initial "Just-in-contact" point, the exact wheel local rolling radius, etc., which are usually a priori unknown, are determined using the two-dimensional geometrical contact model. As part of the coupling strategy, a technique has been developed for adaptive mesh refinement. The mesh and mesh density of wheel-rail finite element models change adaptively depending on the exact location of the contact areas and the local geometry of contact bodies. By this means, a good balance between the calculation efficiency and accuracy can be achieved. Last, but not least, the advantage of the coupling strategy has been demonstrated in studies on the relationship between the initial slips and the steady frictional rolling state. Finally, the results of the simulations are presented and discussed.

Finite Element Simulation of Rail Wheel Rolling Process

FEA on the impact test of aluminium alloy wheel

Progress and Prospects of FE Simulation of Two-roll Cross Piercing Process

The Finite Element Simulation of Wheel Rim Roll Process

Simulation of Steady-State Rolling Non-Pneumatic Mechanical Elastic Wheel Using Finite Element Method

Finite element simulation and experiment verification of rolling forming for the truck wheel rim

The Numerical Simulation of Wheel Rim Roll Forming

Three-dimensional rigid–plastic finite element simulation for the two-roll cross-wedge rolling process

Three-dimensional elastic–plastic stress analysis of wheel–rail cyclic rolling contact using finite element method

Finite Element Analysis for Steady-State Rolling of Radial Tire

The 3-D finite element analysis of press fitting process in railway wheel-set

Using Three-Dimensional Finite Element Analysis for Simulation of Residual Stresses in Railway Wheels

Research on rolling deformation of class channel-guide wheel with engineering machinery

Finite Element Analysis of a Flexible Ferris Wheel

Influence of material properties on the high-speed wheel-rail rolling contact behaviour

Surface rolling FE model for numerical simulation

3D FEM Modeling of Gear Wheel Fine-blanking Forming and the Process Optimization

Finite Element Analysis of Temper Rolling Process

Improving the performance of finite element simulations on the wheel-rail interaction by using a coupling strategy

Tri-dimensional Elastic-Plastic Fem of Rolling Force During Strip Finishing Rolling Process

Finite Element Simulation and Microstructural Analysis of Roll Forming for DP590 High-Strength Dual-Phase Steel Wheel Rims