Abstract:The issue of simulation on stretch bending process of aluminum alloy extrusions is one of the problems in highly nonlinear quasi-static fields.When the explicit dynamics procedure is applied to quasi-static problems,the sensitivity of time on simulation analysis step is required to consider specially.Based on it,FE shell model of quasi-static analysis on stretch bending was established by ABAQUS / Explicit module for general stretch bending process.Then the springback,side-wall thickness and cross-section distortion were analyzed and predicted by static analysis with ABAQUS / Standard.An experiment of stretch bending on Al-2024-O extrusions with Z-section was carried out by A-7B CNC stretch bending forming machine,and the effectiveness of simulation was verified.The springback value,thickness and distortion of cross-section of parts were measured,and compared with the simulation results.The experiment results show the influences of post-stretching strain on the springback value,minimum thickness and cross-section distortion are coincide with the simulation results.And the average relative errors of springback and thickness are 13.74% and 1.66% respectively.It is demonstrated that the established model can be effectively applied to simulation of stretch bending of aluminum alloy.

The Simulation of Roll Forming with Multiple Passes

Simulation of Roll Forming with Dynamic Explicit Finite Element Method

Simulation of Multiple Cold Rolls Progressive Forming for Non-symmetrical Channel Section

Numerical Simulation and Experimental of Forming Defects in Roll-Bending Process for Z-Shaped Profiles With Large Cross-Section

FEM Simulation of Multipass Shape Rolling Processes

Simulation of a multi-stand roll-forming process for thick channel section

Whole process simulation of roll forming using dynamic explicit finite element method

Modelling of Cold Roll Forming of Steel Strip

Study on FEM Simulation of Cage Roll Forming of ERW Pipes

Numerical Simulation of Roll Forming for Channel Section with Outer Edge

Finite element simulation of stretch bending on aluminum alloy extrusions

Explicit Simulation of Roll Forming Process with Eas Solid-Shell Elements

Finite Element Analysis of Temper Rolling Process

FEM Simulation of Main Deformation During Cage Roll-Forming Process

Numerical Simulation and Parameters Analysis for Roll Forming of Martensitic Steel MS980

The Numerical Simulation of Wheel Rim Roll Forming

Stress and Strain Analysis for Multiple Cold Rolls Progressive Forming of Channel Section with Outer Edge

FEM simulation technology on stretch bending of long profile with complex section

Numerical Simulation and Sensitivity Analysis of Parameters for Multistand Roll Forming of Channel Section with Outer Edge

Study on Roll Forming Process Simulation and Roll Diameters Optimization

Computer aided analysis for cold roll forming thin channel section