Abstract:In order to study the dynamic and fracture behavior of 6005 aluminum alloy at different strain rates and stress states, various tests (tensile tests at different strain rates and tensile shearing tests at five stress states) are conducted by Mechanical Testing and Simulation (MTS) and split-Hopkinson tension bar (SHTB). Numerical simulations based on the finite element method (FEM) are performed with ABAQUS/Standard to obtain the actual stress triaxialities and equivalent plastic strain to fracture. The results of tensile tests for 6005 Al show obvious rate dependence on strain rates. The results obtained from simulations indicate the feature of nonmonotonicity between the strain to fracture and stress triaxiality. The equivalent plastic strain reduces to a minimum value and then increases in the stress triaxiality range from 0.04 to 0.30. A simplified Johnson-Cook (JC) constitutive model is proposed to depict the relationship between the flow stress and strain rate. What is more, the strain-rate factor is modified using a quadratic polynomial regression model, in which it is considered to vary with the strain and strain rates. A fracture criterion is also proposed in a low stress triaxiality range from 0.04 to 0.369. Error analysis for the modified JC model indicates that the model exhibits higher accuracy than the original one in predicting the flow stress at different strain rates. The fractography analysis indicates that the material has a typical ductile fracture mechanism including the shear fracture under pure shear and the dimple fracture under uniaxial tensile.

A Study on the Strain-Rate Dependent Dynamic Constitutive Equation of Al2O3 Ceramics

Study on the strain-rate dependent dynamic constitutive equation of A12O3 ceramics

Dynamic Mechanical Properties of Al_2O_3 Ceramics under Higher Strain-Rate

Experimental Study on Dynamic Mechanical Properties of Al2o3 Ceramics

Compressive properties and failure mechanisms of AlON ceramics under different strain rates

A unified constitutive model for strain-rate and temperature dependent behavior of molybdenum

Mechanical Properties and Constitutive Model of Toughening Ceramics

The splitting test method on dynamic tensile strength of Al 2 O 3 ceramic material

Microdamage In Polycrystalline Ceramics Under Dynamic Compression And Tension

Effects of High Pressure and High Strain Rate on Dynamic Compressive Strength of Alumina

SHPB Dynamic Compression Test of Al2O3 Ceramics under Constant Strain Rates

Strain Rate Sensitivity and Constitutive Models of Several Typical Aluminum Alloys

Numerical Modeling of Compressive Failure Mechanisms in Ceramic Materials at High Strain Rates

Strain Rate-Dependent Constitutive and Low Stress Triaxiality Fracture Behavior Investigation of 6005 Al Alloy

Dynamic Response of Ceramic Shell for Titanium Investment Casting under High Strain-Rate SHPB Compression Load

Study on Dynamic Response Properties and Constitutive Relationship of Al2O3 Ceramics

A Dynamic Damage Model for Uniaxial Compressive Response of AD90 Alumina

Research on dynamic mechanical properties and damage model of ceramic materials under multi‐axial stress

Mechanical Characteristics and Constitutive Model of Alumina Ceramic Subjected to Shock Loading

Dynamic Properties and Damage Pattern of A95 Ceramic under Low-Impact Velocity

Mechanical behavior and constitutive relation of a kind of ceramic materials