Abstract:To investigate the macroscopic and microscopic mechanical behavior of polycrystalline materials under the conditions of cyclic loading, a Voronoi polycrystalline aggregation model was employed to study the statistical distribution of stress and strain, and macroscopic cyclic plasticity, for a copper polycrystalline material. The algorithm for solving the visco-plastic constitutive relations that describing the slipping plasticity for single crystal grain of the polycrystalline material applied in the present paper was suggested by Zhang et al. (2004a, 2004b), in which the Cauchy stress tensor is taken as the basic variable to be solved by Newton-Raphson iterations. On the basis of calculation of single crystal constitutive equations, the simulation for a FCC copper polycrystal were carried out under the cyclic loading of symmetrical tensile and compression. According to the results, the distribution of microscopic stress, strain and effective plastic strain, and coefficient of variation (the ratio of the standard deviation to the mean) were analyzed, which shows the heterogeneities of microscopic stress and strain in the Voronoi polycrystal tessellation caused by the randomness of the grain crystals in the polycrystal aggregate. Meanwhile, the curve of mean stress and strain for the Voronoi polycrystalline tessellation were also calculated, the results can reasonably describe the Bauschinger effect and cyclic hardening characteristic of polycrystalline materials. It is necessary to point out that, in the present paper, the cyclic characteristic of polycrystalline material is not set prior. The cyclic plasticity of the Voronoi tessellation is completely obtained from the results modeled by the tessellation associated with the known mechanical behavior of a single crystal, under the cyclic load condition.

Microdamage In Polycrystalline Ceramics Under Dynamic Compression And Tension

Simulation of microplasticity-induced deformation in uniaxially strained ceramics by 3-D Voronoi polycrystal modeling

Micro-failure of metals under inhomogeneous plastic deformation

Numerical modeling of dynamic response and microcracking in shock-loaded polycrystalline transparent ceramic

Heterogeneous Deformation and Damage Mechanisms in Multi-Phase TA15 Ti-alloy: Insights from Experiments Informed Damage-Crystal Plasticity Modelling

4223 - ANALYSIS ON CYCLIC PLASTICITY AND STRESS DISTRIBUTION OF POLYCRYSTAL AT GRAIN LEVEL

Numerical Modeling of Compressive Failure Mechanisms in Ceramic Materials at High Strain Rates

Mesoscopic Deformation Features of Shocked Porous Ceramic: Polycrystalline Modeling and Experimental Observations

CRACK PROPAGATION IN POLYCRYSTALLINE ELASTIC-VISCOPLASTIC MATERIALS USING COHESIVE ZONE MODELS

A crystal plasticity-based microdamage model and its application on the tensile failure process analysis of 7075 aluminum alloy

Numerical Study of Thermal Shock Damage Mechanism of Polycrystalline Ceramics

Competition Between Plasticity- and Void-Based Dynamic Damage Behaviors of Single Crystal HCP-Zr by Considering the High Strain Rate and Temperature

Progressive Fragment Modeling of Failure Wave in Ceramics under Planar Impact Loading

Probing the constitutive behavior of microcrystals by analyzing the dynamics of the micromechanical testing system

Crystal Plasticity Modeling and Neutron Diffraction Measurements of a Magnesium AZ31B Plate: Effects of Plastic Anisotropy and Surrounding Grains

Dynamic strength, reinforcing mechanism and damage of ceramic metal composites

Dynamic Compressive Response and Fracture Mechanisms of ZrB2–SiC Ceramic Based on Discrete Element Method

Research on dynamic mechanical properties and damage model of ceramic materials under multi‐axial stress

Micro-Scale Plastic Deformation of Polycrystalline Ti3sic2 under Room-Temperature Compression

Mechanical Behaviors and Damage Constitutive Model of Ceramics under Shock Compression

The effect of crystal anisotropy and plastic response on the dynamic fracture of energetic materials