Abstract:Molybdenum (Mo), a bcc metal with a melting point of 2,610 degrees C and a density of 10.22 g/cm(3), is an important refractory metal. The refractory properties of molybdenum reflect the high strength of interatomic bonding resulting from the overlap of the 4d-orbitals and the number of bonding electrons available (1).The melting point of molybdenum is exceeded only by those of tungsten and tantalum, among the useful high-temperature metals. This makes molybdenum essentially a "hot strength" material. Molybdenum is ductile at room temperature, with a brittle-ductile transition temperature significantly lower than that of tungsten. The density of molybdenum is approximately 62% of that of tantalum, and is approximately one half of that of tungsten, making molybdenum a good candidate for applications where high-temperature capability, weight considerations, and ductility are key issues.Molybdenum also possesses much greater specific heat than either tantalum or tungsten, making it easier to thermally treat molybdenum to produce structures with low thermal stresses than most other metals. Molybdenum is resistant to most chemical reagents except for oxidizing acids. The relatively low thermal neutron cross section of molybdenum also makes it suitable for nuclear applications. The unique properties of molybdenum make it an ideal material for high-temperature engineering applications. Since the 1960's, molybdenum has also been chosen by many researchers as an ideal material to examine the deformation behavior of bcc metals. These studies have, however, focused on low strain-rate regimes.The deformation characteristics of bcc metals differ markedly from those exhibited by fee metals. For example:1) the yield strength and flow stress of bcc metals increase rapidly with decreasing temperature and increasing strain rate, in contrast to the much more modest trends exhibited by fee metals,2) the activation volume for the deformation of bcc metals is in the range of 5-50b(3) (b = magnitude of Burgers' vector of dislocations), whereas that for fed metals is often 10-100 times greater,3) the increase in the yield point with a decrease in temperature is independent of the strain-hardened state in bcc metals, whereas it is greater for the higher strain-hardened states for fee metals.The study of the deformation behavior of molybdenum is expected to lead to a more detailed understanding of the deformation mechanisms of bcc metals, in particular the refractory metals. The focus of the present work has been on the high strain-rate, high strain response of molybdenum, over a broad range of temperatures. Before presenting our experimental and the corresponding micromechanical modeling results, we briefly review some of the existing relevant contributions.

A unified constitutive model for strain-rate and temperature dependent behavior of molybdenum

Experimentally-Based Micromechanical Modeling of Dynamic Response of Molybdenum

Constitutive modeling for high-temperature tensile deformation behavior of pure molybdenum considering strain effects

Modeling the Strain Rate-Dependent Constitutive Behavior in Nanotwinned Polycrystalline Metals

Deformation Behavior and Constitutive Modeling of Thin Pure Molybdenum Sheet at Room to Medium Temperatures

Rheological Behavior of Pure Molybdenum at High Temperature Considering Strain Compensation

Constitutive Modelling of Plasticity of Fcc Metals under Extremely High Strain Rates

Constitutive Model For Molybdenum-Niobium Alloy During Hot Deformation

The Constitutive Model and Threshold Stress for Characterizing the Deformation Mechanism of Al0.3CoCrFeNi High Entropy Alloy

A Thermomechanically Coupled Finite Deformation Constitutive Model for Shape Memory Alloys Based on Hencky Strain

The Characteristics of Plastic Flow and a Physically-Based Model for 3003 Al–Mn Alloy Upon a Wide Range of Strain Rates and Temperatures

A constitutive description of the strain rate and temperature effects on the mechanical behavior of materials

Comparative Study of the Dynamic Deformation of Pure Molybdenum at High Strain Rates and High Temperatures

High Temperature Compression Tests of Molybdenum-Rhenium Alloys and Constitutive Model Establishment with Internal State Variables

Constitutive Modeling of Annealed OFHC with Wide Strain-Rate and Temperature Effects: Incorporating Dislocation Dynamics and Normalized Microstructural Size Evolution

Constitutive Modeling for High Temperature Flow Behavior of a High-Strength Manganese Brass

Constitutive Modeling for Elevated Temperature Flow Behavior of ZHMn34-2-2-1 Manganese Brass

A Comparative Study on Modified Johnson–Cook and Arrhenius-Type Constitutive Models to Predict the Hot Deformation Behaviour of Molybdenum-Hafnium-Carbide Alloy

A Micromechanical Constitutive Model for Unusual Temperature-Dependent Deformation of Mg–NiTi Composites

Explosion/impact Response of Pure Molybdenum at Ultra-High Strain Rate and Large Strains

A strain rate dependent thermo-elasto-plastic constitutive model for crystalline metallic materials