Abstract:High strain rate forming (HSRF) is promising to break through the conventional forming limit of materials and thus to form hard-to-deform components. During HSRF process, long-lasting micro-defects before fracture, i.e. adiabatic shear bands (ASBs) in compression and voids in tension, are significant characteristics existing in a large strain range. These defects bring about the non-destructive softening of stress and continuous exertion of ductility, in return, the stress responses affect the evolution of micro-defects. However, the interaction between stress responses and defects evolution has not yet been reflected in the existing models, resulting in a limited prediction accuracy. Aiming at this issue, the competition between hardening caused by thermal activated dislocation movements and the flow softening brought by micro-defects evolution was well modeled in this work. During the modeling, the relation between the normal strain and effect zone of ASBs was established via the modification of Bai-Dodd model by considering the geometric features of ASBs. Moreover, by introducing a rate-dependent ASB trace angle, the half width of ASBs was expressed as a function of maximum shear strain and critical instability strain. The effect of strain and strain rate to the evolution of voids under tensile conditions was taken into account by combining Hollomon hardening law with Johnson-Mehl-Avrami-Kolmogorov (JMAK) equation. Then, the interactions between micro-defects and structure related athermal stress were characterized by connecting volume fraction of voids and effective bearing area in tension and the intensity of flow localization with ASBs width in compression. As a consequence, a unified model of constitutive behaviors coupled with micro-defects evolution was established with considering rate-dependent hardening and softening. Applied to aluminum alloys, this model piedicts the stress responses, evolution of ASBs and voids, and low or negative strain rate sensitivity with high precision in large ranges of strain (0-0.6) and strain rate (0.001-5000 s(-1)). The proposed model is thus believed to be with a successful application in precise prediction and optimization of HSRF processes. (C) 2016 Elsevier Ltd. All rights reserved.

Constitutive Modelling of Plasticity of Fcc Metals under Extremely High Strain Rates

A Constitutive Model for Dynamic Plasticity of FCC Metals

Modeling the Strain Rate-Dependent Constitutive Behavior in Nanotwinned Polycrystalline Metals

On the Constitutive Models for Ultra-High Strain Rate Deformation of Metals

Flow Stress and Constitutive Model of OFHC Cu for Large Deformation, Different Temperatures and Different Strain Rates

Constitutive Modeling of Annealed OFHC with Wide Strain-Rate and Temperature Effects: Incorporating Dislocation Dynamics and Normalized Microstructural Size Evolution

Unified Crystal Plasticity Model for Fcc Metals: from Quasistatic to Shock Loading

Comparison of Constitutive Models for Fcc Metals over Wide Temperature and Strain Rate Ranges with Application to Pure Copper

A Unified Physically Based Crystal Plasticity Model for FCC Metals over a Wide Range of Temperatures and Strain Rates

A Rate Dependent Constitutive Model for ECAE Cu Based on Instrumented Nanoindentation Results

0610 A Comparative Study on Gao-Zhang and Johnson-Cook Constitutive Models

An investigation of the combined size and rate effects on the mechanical responses of FCC metals

An electroplastic constitutive model of fcc metals and their alloys under high current density

A strain rate dependent thermo-elasto-plastic constitutive model for crystalline metallic materials

Experimental and Physical-Based Constitutive Model Study of Fcc Metal over Wide Temperature and Strain Rate Ranges

Grain-level Statistical Plasticity Analysis on Strain Cycle Fatigue of a FCC Metal

Strain Rate Sensitivity and Constitutive Models of Several Typical Aluminum Alloys

Constitutive modelling of the high strain rate behaviour of interstitial-free steel

A new constitutive model for HCP metals

The Constitutive Model and Threshold Stress for Characterizing the Deformation Mechanism of Al0.3CoCrFeNi High Entropy Alloy

A Unified Model for Coupling Constitutive Behavior and Micro-Defects Evolution of Aluminum Alloys under High-Strain-rate Deformation