Abstract:Using ammonium metatungstate, soluble cobalt salt and soluble carbon as the raw materials, ultrafine WC-Co composite powder was synthesized by spraying conversion, calcination, in-situ reduction and carbonization route. Another composite powder was also fabricated by the same route, except with an additional short-time ball milling process after the calcination. Then ultrafine WC-Co cemented carbides were prepared by spark plasma sintering with the two kinds of powders. The morphology, microstructure and mechanical properties of composite powders and cemented carbides were characterized by SEM, XRD, Vickers hardness tester and so on. The results show that the composite powder fabricated via the route without the short-time ball milling process is spherical and has obvious sintering characteristics. WC particles are bonded together, and the sintering neck and abnormal grain growth can be observed obviously. The powder fabricated via the route with a short-time ball milling process is more disperse. The fcc-Co and hcp-Co exist in both kinds of powders, and the grain size of WC is 0.26 mu m. There are a few pores existing in the alloy prepared by the spherical composited powder. The density is lower and the WC has abnormal growth. However, the mechanical properties of the alloy prepared by the dispersed composite powder are better.

Preparation of Cobalt Powder for Cemented Carbides by Glycol Reduction

Preparation of spherical ultrafine cobalt powder by polyol reducing

Preparation and Characterization of Ultra-Fine Cobalt Powder

Preparation of Ultrafine Spheric Co Powder by Polyot Reduction

Preparation of Metal Cobalt Powder by Co-Precipitation and Heat Decomposition Method

Ultra-Coarse Grain Wc-Co Cemented Carbide From Chemical Coated Powder By One-Step Hydrogen Reduction

Synthesis of WC Composite Powder with Nano-Cobalt Coatings and Its Application in WC-4Co Cemented Carbide

Preparation of Microsized Co3O4 Octahedra by Cobalt Salt Precipitation and Thermal Decomposition

Synthesis of WC-Co Composite Powder by Reduction and Carbonization Reactions and Its Densification

Study in the Preparation of Near-spherical Co3O4 Powder

Study of Preparation of Cobalt Aluminate by Sol-Gel Process and Electroless Plating

Preparation of Spherical Cobalt Carbonate Powder with High Tap Density

Effect of Cobalt Content on the Microstructure and Mechanical Properties of Coarse Grained WC-Co Cemented Carbides Fabricated from Chemically Coated Composite Powder

PREPARATION AND APPLICATION OF SUPERFINE COBALT POWDER

Preparation of Fine Cobalt Oxide Powder

Preparation of Spherical Cobalt Carbonate from Cobalt Sulfate Solution

Preparation of low binder WC-Co-Ni cemented carbides with fine WC grains and homogeneous distribution of Co/Ni

Ultra-fine Grain Cemented Carbide Fabricated from WC-Co Composite Powder by In-situ Synthesis

WC-Co Cemented Carbide from Porous Spumous Cobalt Enwrapped WC Powders by Chemical Route

Effect of Cobalt Adulterant on Particle Size and Microscopic Morphology of Coarse and Ultra Coarse Tungsten Carbide Powder

Preparation of nano-scaled WC powder by low-temperature carbothermic reduction method