Ultimate Load-carrying Capacity of 3-Pipe Shuttle-shape Steel Latticed Column

郭彦林,陈国栋,兰勇

DOI: https://doi.org/10.3321/j.issn:1000-6869.2002.05.004

2002-01-01

Abstract:The constitution of 3 pipe shuttle shape steel latticed column(SLC) is introduced, and the ultimate load behavior of this kind of columns is presented by employing an elastic plastic large displacement finite element analysis. Much more attention has been paid to the failure mechanism and influence of the initial geometric imperfection distribution forms and their amplitudes on the load carrying capacity of the column. The influences of some other parameters have also been taken into consideration including the column length, the slenderness ratio of the column and its single chords, the number of diaphragms and their thickness, etc. Conclusions have been drawn from the numerical results obtained that the column failure mechanism and associating load carrying capacity rely mainly on column length, its initial geometric imperfection distribution forms and their amplitudes. It is also found that the column failure mode switches from Sshape to single wave shape while the column slenderness ratio is or thickness of diaphragms increasing, and from single wave shape toSshape while the single chord slenderness ratio is increasing, and further, the second order effect is the main reason to cause the column failure. The FEM analysis results obtained for the columns used in engineering practice agree very well with those from the test, where it is assumed that the initial imperfection distribution is the same as the first elastic buckling mode with maximum magnitude of L/500.