Abstract:Strain-hardening cementitious composites (SHCC), composed of short fibres embedded within brittle matrix, exhibit distinctive pre-peak strain-hardening characteristics and remarkable tensile ductility. The fracture and failure process of SHCC, involving both hardening and softening stages as a result of matrix multiple micro-cracking and strain localization, is highly complex and poses a significant challenge for numerical modelling. In the present paper, a novel numerical framework, characterized by the bi-layer superposed cohesive zone strategy, is developed for the numerical modelling of fracture and multiple cracking of SHCC, at both the material scale and structural scale. The developed model is based on diffused cohesive interface model, but with adaptions to consider fibre bridging mechanism. The crack interface is simulated by two cohesive elements sharing the same nodes: one for the matrix-cohesion effect and the other for the fibre-bridging effect. Cohesive constitutive relations of matrix cohesion and fibre bridging are carefully assigned. The proposed model is first validated on the material scale through a uniaxial tension test. With the aid of a random material field, multiple-cracking phenomenon and stress fluctuation are successfully predicted by the model. The model is then applied to the structural fracture modelling, where four case studies, including both pure mode I and mixed mode fracture, are performed. The size effect and boundary effect on the fracture behaviour are well captured by the numerical modelling. The model proposed in the current work has the potential to be extended to the multiple cracking modelling of other materials.

COUPLING EFFECTS OF MULTIPLE TOUGHENING MECHANISMS IN WHISKER REINFORCED CMCs

Toughening mechanisms and whisker orientation dependence in whisker reinforced CMCs

Toughening effects of CMCs directionally reinforced with discontinuous elongated reinforcements

The effect of whisker orientation in SiC whisker-reinforced Si3N4 ceramic matrix composites

Roles of orientation relationship and recrystallization in superplasticity of SiCw/6061Al composite

The Dual Effect Of Whiskers On Toughening And Conducting Properties In Aligned Sic Whisker-Reinforced Si3n4-Matrix Composites

Numerical investigations on the hybrid effect and deformation mechanism of TiB2p and TiBw reinforced Cu composites prepared by in-situ mixing casting

Processing and Properties of Oriented SiC Whisker-Reinforced Si3N4 Ceramic Matrix Composites

Composite structural modeling and mechanical behavior of whisker reinforced Cu matrix composites

Study on the fracture behavior and toughening mechanism of Si3N4/SiC(n)/SiC(w) nanocomposites

Tailoring the toughening effects in two-dimensional nanomaterial-reinforced ceramic matrix composites

Study of key technologies on whisker-reinforced ceramic matrix composites (Part III): design of in-situ fibrous monolithic structure and laminated structure

Effect of Cr micro-alloying on microstructure and mechanical properties of alumina whisker and graphene co-reinforced copper matrix composites

Study of Key Technologies on Whisker-Peinforced Ceramic Matrix Composites (Part Ⅰ): Adjusting Grain Boundary and Interfacial Phase

CCCs off-axial orientation sensitivity analysis in hole pin-bearing failure via hierarchical multiscale simulation framework

Evolution of the microcracks in whisker toughening ceramic matrix composites

Fracture and Multiple-Cracking Modelling of Strain-Hardening Cementitious Composites

Mullite-bonded SiC-whisker-reinforced SiC Matrix Composites: Preparation, Characterization, and Toughening Mechanisms

Improved Resistance to Damage of Silicon Carbide-Whisker-Reinforced Silicon Nitride-Matrix Composites by Whisker-Oriented Alignment

Mechanical propert ies of CaCO_3 whisker-reinforced high-st rength cement-based materials

Profound Strengthening and Toughening Effect of Reinforcement Aspect Ratio in Composite with Network Architecture