Abstract:The size effect in the fracture of solids represents a highly critical issue with a prolonged history of research. The size effect of traditional quasi-brittle materials can already be well described through the size effect model. However, there is still a lack of research on the size effect of strain-hardening cementitious composites (SHCC), a special type of fibre-reinforced concrete with macro-scale strain-hardening behaviour after first cracking. Being distinct from traditional quasi-brittle materials with softening nature, SHCC is thus expected to behave differently in terms of size effect. In this research, the structural size effect problem of SHCC is comprehensively studied by experimental investigation and theoretical analysis. Geometrically similar notched three-point bending specimens were tested in mode I and mixed mode I/II fracture condition. The whole-process of failure and matrix cracking zone around the main crack was captured with high resolution by digital image correlation technology. Experimental results showed that apparent fracture energy, nominal strength, structural ductility and fracture resistance curve are all structural size-dependent. The apparent fracture energy was shown to arise with specimen size within the tested range. This is related to large-scale pseudo yielding, i.e. enlargement of matrix cracking zone (like the yielding zone in metals) with increasing structural size. It thus provides an indirect method for the estimation of cohesive fracture energy of single crack with constitutive nature. Due to the scaled matrix cracking zone, an intermediate asymptote exists in the size effect curve of nominal strength, in addition to the plastic and LEFM asymptotes in the Bažant original size effect law. This resembles the recent finding of intermediate asymptote in plastic-hardening metal( Dönmez et al. 2023 ). The size-dependence of R-curve was also examined. Though size-dependent, the equivalent LEFM-based R-curves are shown to have three common stages reflecting different cracking processes. Based on experimental results, the size effect of fracture energy and nominal strength are finally modelled theoretically in the Bažant's framework of equivalence between energy release and fracture resistance.

Fracture and Multiple-Cracking Modelling of Strain-Hardening Cementitious Composites

Stochastic Fracture of Concrete Composites: A Mesoscale Methodology

3-D Numerical Modelling of Mesoscopic Configuration and Cracking of Concrete

Progress in Complex 2d and 3d Cohesive Fracture Modelling Considering Random Heterogeneity

A Mesoscale Modelling Approach Coupling SBFEM, Continuous Damage Phase-Field Model and Discrete Cohesive Crack Model for Concrete Fracture

Bending behavior of strain hardening cementitious composites based on the combined fiber-interface constitutive model

A Phase-Field Framework for Modeling Multiple Cohesive Fracture Behaviors in Laminated Composite Materials

Study Of Flexural Response In Strain Hardening Cementitious Composites Based On Proposed Parametric Model

Monte Carlo simulation of complex cohesive fracture in random heterogeneous quasi-brittle materials

Monte Carlo Simulation of Complex Cohesive Fracture in Random Heterogeneous Quasi-Brittle Materials: A 3D Study

3 D In-situ XCT Image Based Mesoscale Fracture Modelling and Validation of Concrete Using Voxel Hexahedron Meshing and Damage Plasticity Model

A statistical micromechanical model of multiple cracking for ultra high toughness cementitious composites

Monte Carlo Simulation of Complex 2D Cohesive Fracture in Random Heterogeneous Quasi-Brittle Materials

3D meso-scale fracture modelling and validation of concrete based on in-situ X-ray Computed Tomography images using damage plasticity model

An Adaptive Stochastic Multi-Scale Method for Cohesive Fracture Modelling of Quasi-Brittle Heterogeneous Materials under Uniaxial Tension

Pseudo Strain Hardening Model of Ultra High Performance Cementitious Composites under Flexural Loading

3D Meso-Scale Fracture Modelling and Validation of Concrete Based on in Situ X-ray CT Images and Cohesive Crack Model

Structural size effect in the mode I and mixed mode I/II fracture of strain-hardening cementitious composites (SHCC)

Hierarchical multiscale fracture modeling of carbon-nitride nanosheet reinforced composites by combining cohesive phase-field and molecular dynamics

Mesoscale Numerical Investigation of Dynamic Spalling Fracture in Toughness Concrete

A heterogeneous cohesive model for quasi-brittle materials considering spatially varying random fracture properties