Abstract:A novel micromachining technology for multilevel structures of silicon is described in this paper. Complicated multilevel structures can be formed by using a maskless etching following a conventional masked etching in aqueous KOH. The process consists of two successive steps. First, structures with (111) sidewalls are formed for a desired etching depth on the surface of a (100) silicon wafer by a conventional masked anisotropic etching process with a specially designed etching mask. Then, the etching mask is removed except for some areas (such as the frame of the chip) and a maskless etching follows. In addition to the downward etching of the upper and lower (100) planes during maskless etching, fast-etching (311) planes emerge at the upper edges of the (111) sidewalls and cut the (111) sidewalls, while the (111) sidewalls extend downward at the lower ends. As the (311) planes replace the (111) sidewalls with a rate faster than the extension rate of the (111) planes, the (111) sidewalls will finally be replaced by (311) planes. Moreover, by an appropriate mask design and an appropriate etching depth of the previous masked etching, the bottom areas of some etching cavities diminish temporarily so that the downward etching in these areas is stopped for time intervals after the intersection of (111) planes on the bottom and before the (111) planes are replaced completely by the (311) planes. Once the (111) sidewalls are replaced completely by the (311) planes, the bottom areas reappear and the etching downward resumes. Analyses show that levels with different depths can be created in this way for different window apertures and the number, positions as well as the depths of the new levels can be individually decided by the design of the single mask for masked etching and the etch depths of both masked and maskless etching processes. More than 10 interesting multilevel structures with up to five structure levels have been fabricated. The results show that the technology is very versatile and repeatable. Therefore, this technology is a very useful new tool for making silicon micromechanical structures to meet the ever-increasing demands for solid-state sensors and actuators. (C) 1997 Elsevier Science S.A.

Overview of Non-Traditional Micromachining Technologies

The Fabrication of Micro/Nano Structures by Laser Machining

Microfabrication Technology of Three-Dimensional Microdevices and Their Mems Applications

Micro Electro Machining Technologies for Industrial Application

Machining technologies and structural models of microfluidic devices

Precision micro-milling process: state of the art

Metal Microstructure Microfabrication Technique

Inkjet printing, laser-based micromachining, and micro–3D printing technologies for MEMS

Micromachining for Optical and Optoelectronic Systems

TECHNOLOGY OF SILICON-BASED MEMS

Fabrication of 3D Metal Microstructures Using a Hybrid Process of Micro-EDM and Laser Assembly

Parallel Laser Micro/Nano‐Processing for Functional Device Fabrication

A novel micromachining technology for multilevel structures of silicon

Scanning Micro-Electrochemical Machining Process for V-Shaped Grooves

Advances in micro milling: From tool fabrication to process outcomes

Recent Developments in Mechanical Ultraprecision Machining for Nano/Micro Device Manufacturing

Manufacturing of 3D Multifunctional Microelectronic Devices: Challenges and Opportunities

Silicon microstructuring technology

Laser Nanofabrication: Applications in Micro-Optics, Micro-Electronics, Micromachines, and Microfluidics

A simple method for producing freestanding 3D microstructures by integrated photomask micromolding

Optimization mechanism and applications of ultrafast laser machining towards highly designable 3D micro/nano structuring