Abstract:The extreme sharpness for superhard micro mills is urgently needed to improve the surface quality, restrain size effect and suppress burr formation for the widely used miniature components. Therefore, laser cutting and precision grinding are coupled to form a hybrid method for the fabrication of diamond micro mills with extremely sharp edge. Firstly, the laser cutting simulation of polycrystalline diamond (PCD) based on various laser energy density and laser scanning speed was conducted to provide temperature distribution. Then the laser cutting experiments were conducted, and the influence of laser cutting parameters applied on the machining consequences (kerf width, cutting cycles, affected layer thickness, and surface roughness of cutting section) were analysed according to the simulation model. On this basis, the laser energy density and scanning speed were optimized as 175 J/cm 2 and 0.2 mm/s respectively to obtain the smooth and uniformly graphitized surface. Moreover, the grinding experiments were conducted on the cutting section obtained by the optimized laser parameters, the impact of the abrasive grain size, grinding depth per path and feeding speed on the grinding results were studied, these grinding parameters were optimized as 1 μm, 1 μm, and 2 mm/min to realise the micro abrasion during grinding process. In this way, PCD micro end mills (PCDMs) with surface roughness Sa of 57.3 nm, effective length of 600 μm, diameter of 400 μm, and radius of cutting edge of 0.19 μm were fabricated. Finally, the micro-milling experiments with PCDMs were performed on the Ti-6Al-4V material, the micro slots and thin-walled structure were processed with almost no burrs being observed and the obtained surface roughness Sa of 18.3 nm. With the obtained machining results, the remarkable cutting performance of PCDM was validated.

Advances in micro milling: From tool fabrication to process outcomes

Precision micro-milling process: state of the art

A review on micro-milling: recent advances and future trends

The Fabrication of Micro/Nano Structures by Laser Machining

Tooling aspects of micro electrochemical machining (ECM) technology: Design, functionality, and fabrication routes

Machining dynamics and chatters in micro-milling: A critical review on the state-of-the-art and future perspectives

A review of micro/nanostructure effects on the machining of metallic materials

Experimental Research on Deep-And-Narrow Micromilled Grooves Using a Self-Fabricated PCD Micro-Cutter

Microfluidics for Medical Additive Manufacturing

Carbon Micro/Nano Machining toward Miniaturized Device: Structural Engineering, Large-Scale Fabrication, and Performance Optimization

Recent Developments in Mechanical Ultraprecision Machining for Nano/Micro Device Manufacturing

Advancements in micromachining of additive manufactured materials: a comprehensive review

Macro electrochemical milling and its hybrid variants

Review of molecular dynamics simulations in laser-based micro/nano-fabrication

Evaluation of milling performance of 50-μm D-shaped carbide tool, polycrystalline diamond-coated carbide tool, and polycrystalline diamond tool

The state of the art for numerical simulations of the effect of the microstructure and its evolution in the metal-cutting processes

Experimental study of a new micromilling process for vortex curved thin walls

Formation mechanism and controlling technique for fabrication of extremely sharp diamond micro mills

Finite element simulation and experimental investigation on cutting mechanism in vibration-assisted micro-milling

Investigation on the Tool Wear Suppression Mechanism in Non-Resonant Vibration-Assisted Micro Milling

An Overview of Ultra-Precision Diamond Machining of Microstructured Freeform Surfaces