Abstract:The Air-cooled and open cathode proton exchange fuel cell (PEMFC) offers particular advantages in terms of complexity and weight reduction. Therefore, it seems very attractive to support the aviation industry in their de‐carbonisation process. Major challenges in terms of operational stability and reliability hinders this technology to be used in commercial applications. Therefore, this study thoroughly examines the conditioning and optimization of open cathode PEMFC stacks, drawing insights from experimental findings. Key areas of focus include the enduring impact of pre-humidification, the quantification of efficiency enhancements through reconditioning via oxygen starvation, and the refinement of Electrochemical Impedance Spectroscopy (EIS) data analysis under non-stationary conditions. The pre-humidification enhances stack performance by improving cell voltages from 40.09 V to 41.37 V at 30 A, increasing membrane humidity and improving efficiency. Furthermore, the residual water in the stack also functions as evaporative cooling and can assist in limiting the operating temperature of the stack during system start up. However, it is demonstrated that excessive soaking with water leads to severe flooding phenomena at the beginning of operation. A reconditioning period of 100 s through oxygen starvation induces a notable increase in stack voltage, from 41.37 V to 47.79 V at 35 A, which decreases to 43.56 V after 10 min of operation. This corresponds to an average increase in electric energy provision of about 6.2% at constant hydrogen consumption, attributed to PtOx reduction and increased water production. Despite limitations outside the medium frequency range (approximately 10 Hz – 15 kHz) for non-stationary conditions, EIS aids in understanding of the stack behaviour and supports the interpretation of current and voltage results. A novel evaluation method enables the quantitative description of the condition using EIS data. This data reveals a considerable drop (on average about 21,5% for the 10 A point and about 27,4% for the 30 A point) in charge transfer resistances of the fuel cell from initial operation to measurements after overnight soaking and the first series of oxygen starvation recovery.

Electrochemistry Properties of MCFC Single Cell and Stacks under Different Conditions

Experimental Study on High-Efficiency Microtubular Solid Oxide Fuel Cell Stacks Using Various Fuels

Performance Analysis of Flat-chip Solid Oxide Fuel Cells with Discrete Interconnector Designs

Development of Integrated Packaged Single Fuel Cell Short Stack Based on Titanium Metal Plates for Mobile Power Generation

Development and performance test of molten carbonate fuel cell reactor

Scale-up and stack performance of single-chamber microbial fuel cells with activated carbon air cathodes

Understanding performance difference in the scale-up of flat-chip solid oxide fuel cell: An experimental and numerical study

Study on the Heat and Mass Transfer Mechanisms of Liquid-Cooled PEMFC Stacks Based on Non-Isothermal Model

Several Important Aspects of H2-air PEMFC Engine

Parameters affecting the performance of anaerobic baffled stacking microbial fuel cell

Numerical Study on Effects of Structure Parameters and Operating Conditions on the Micro-Tubular SOFC Stack Performance

Design of Carbon Dioxide Reduction Electrolysis Stacks and Trial Production of Electrolytic Cell Prototype

Analysis of the Assembly Pressure of a High-Power Molten Carbonate Fuel Cell Stack During Initial Roasting

Optimal performance and modeling study of air-cooled proton exchange membrane fuel cell with various bipolar plate structure

Power characteristics and fluid transfer in 40 W direct methanol fuel cell stack

Experimental investigation on statistical characteristics of cell voltage distribution for a PEMFC stack under dynamic driving cycle

The Development and Performance Analysis of All-China-made PEM Fuel Cell Unit and 1 Kw Level Fuel Cell Stack

High performance zinc air fuel cell stack

A comprehensive investigation on performance heterogeneity of commercial-size fuel cell stacks during dynamics operation

Novel electrochemical and thermodynamic conditioning approaches and their evaluation for open cathode PEM-FC stacks

Stacked all-graphite microfluidic microbial fuel cells