Abstract:A hydride generation atomic-absorption spectrometric (AAS) method with flow-injection (FI), aimed at developing a practical routine assay for the determination of tin in food digests, is described. In order to modify the sample matrix and to achieve optimized and reproducible conditions for the hydride generation reaction, the analyte is initially converted into its chlorostannate-complex thereby allowing it to be separated and preconcentrated on-line on an incorporated micro-column packed with a strongly basic anion exchanger and subsequently to be eluted by diluted nitric acid under strictly controlled conditions. Optimum acidic conditions for the FI hydride generation AAS system was found to be 0.01-0.05M nitric acid. At a consumption of 2.7-ml sample volume, aspirated by time-based injection, the procedure resulted in an enrichment factor of 3.5 and yielded a detection limit of 0.08 microg/l. (3sigma) at a sampling frequency of 72/hr. The precision was 2.5% rsd at the 10 microg/l. level. Potential interferents, such as Ni(II), Co(II), Zn(II) and Fe(III) could, at a Sn level of 10 microg/l., be tolerated at an excess of 1000 times without impairing the assay, while a 100-1000-fold excess of Cu(II) decreased the signal by 10-15%. Recoveries in the range 94-102% were obtained for canned food sample digests spiked with 10 microg/l. Sn.

Direct determination of trace elements lead and tin in high purity nickel by GFAAS

[Direct determination of trace element arsenic in high purity nickel by GFAAS].

GFAAS DETERMINATION OF TRACE AMOUNTS OF ARSENIC IN HIGH PURITY NICKEL

Determination of trace elements in high purity nickel by high resolution inductively coupled plasma mass spectrometry

Successive Determination of Co、Fe、Cu、Ca、Mn、Zn、Mg and Pb in Nickel Powder by Standard Addition FAAS

Determination of Tin in Nickel-based Alloys by Electrothermal Laser-excited Atomic Fluorescence with Confirmation of Accuracy by Inductively Coupled Plasma Mass Spectrometry and Atomic Absorption Spectrometry

FAAS Determination of Trace Amount of Nickel in Water Samples with Cloud Point Extraction

FI-FAAS Determination of Trace Amounts of Lead with On-line Enrichment by Phosphate Precipitation

Atomic Absorption Determination of Lead, Bismuth, Selenium, Tellurium, Thallium and Tin in Complex Alloys Using Direct Atomization from Metal Chips in the Graphite Furnace

Determination of Trace Amounts of Nickel (ii) by Graphite Furnace Atomic Absorption Spectrometry Coupled with Cloud Point Extraction

Determination of As, Pb, Sn, Sb and Bi in High Temperature Iron and Nickel-Based Alloy by Graphite Furnace Atomic Absorption Spectrometry Combined with Liquid-Liquid Extraction

GF-AAS DETERMINATION OF MICRO-AMOUNTS OF LEAD IN AVIATION COPPER ALLOY

Determination of Copper, Nickel and Tin in Anodized Electrolytic Coloring Coating of Al by GFAAS

The Determination of Trace Amounts of Tin by Flow-Injection Hydride Generation Atomic-Absorption Spectrometry with On-Line Ion-Exchange Separation and Preconcentration.

Advance in Analysis of Trace Nickel

Direct determination of trace impurities in high purity neodymium after in-situ analyte-matrix separation by fluorination assisted ETV-ICP-AES

ICP-MS DETERMINATION OF ELEMENTS OF MICRO AND TRACE AMOUNTS IN LEAD GRID

Determination of Trace Lead in Water Samples by Graphite Furnace Atomic Absorption Spectrometry after Preconcentration with Nanometer Titanium Dioxide Immobilized on Silica Gel

Determination of Trace Metal Impurities in High Pure Tin Oxide Electrode Material by Inductively Coupled Plasma Mass Spectrometry

[Study on the Direct Determination of Pb and Cd in Milk Powder by GFAAS].

Determination of trace nickel in Bi-based superconductor powder by inductively coupled plasma atomic emission spectroscopy after separation with anion exchange resin and extraction with methylbenzene