Abstract:A method for the determination of impurities in iron-nickel-based superalloys by high-resolution glow discharge mass spectrometry is described. The optimum discharge conditions were investigated to obtain stable discharge and good sensitivity. The interference was separated in high resolution mode of the instrument. The calibration relative sensitivity factors (RSF) for 12 elements were obtained with the matrix-matched certified reference material. IARM Ni909-18. The reference material was analyzed by using the calibration RSFs. The relative error of the measured value was within 16.4% compared with the certified value, and the relative standard deviation (RSD) was less than 7.0%. The 12 elements in the iron-nickel-based superalloy were determined using the calibration RSFs (quantitative analysis) and the standard RSFs (semi-quantitative analysis) in the instrument, including C, N, O and S. The results of the verification methods, such as inductively coupled plasma optical emission spectrometry (ICP-OES), inductively coupled plasma mass spectrometry (ICP-MS), high frequency combustion infrared absorption and inert gas pulse infrared thermal conductivity, were closer to quantitative analysis results. The elements without certified values in the reference material were determined by using the standard RSFs. There was no significant difference between the results of GDMS and the verification by ICP-MS. The validation revealed that the proposed analytical approach achieves reliable results for the rapid determination of several impurities, such as metals as well as non-metals, even the gas elements C, N, O and S.

Successive Determination of Co、Fe、Cu、Ca、Mn、Zn、Mg and Pb in Nickel Powder by Standard Addition FAAS

Further Improvement of Flame Atomic Absorption Spectrometric Determination for Cu, Pb and Cd After Preconcentration Using a Rapid Coprecipitation Technique

FAAS Determination of Trace Amount of Nickel in Water Samples with Cloud Point Extraction

Determination of Iron, Lead and Nickel in Zinc Powder by Atomic Absorption Spectrometry

Continuous Determination of Copper, Zinc, Chromium, Lead,and Iron Impurities in Bright Nickel Plating Baths by Standard Atomic Absorption Spectrometry

Determination of Lead and Chromium(Ⅵ) Content in Water by FAAS after Extraction

Determination of As, Pb, Sn, Sb and Bi in High Temperature Iron and Nickel-Based Alloy by Graphite Furnace Atomic Absorption Spectrometry Combined with Liquid-Liquid Extraction

Determination of trace cobalt, nickel and cadmium by on-line flow injection analysis with coprecipitation preconcentration FAAS

In-situ Determination of Metallic Variation and Multi-Association in Single Particles by Combining Synchrotron Microprobe, Sequential Chemical Extraction and Multivariate Statistical Analysis.

The determination of elements Fe,Mn and Ni in the marine organisms by AAS

Direct determination of trace elements lead and tin in high purity nickel by GFAAS

FAAS Determination of 11 Elements of Microamounts in Anticancer Chinese Herbal Medicines

Determination of Ni,Al,P,Mg and Ca in Nickel Ores by Inductively Coupled Plasma-Atomic Emission Spectrometry

Multi-Element Determination in Chalcopyrite by Inductively Coupled Plasma Atomic Emission Spectrometry

[Direct determination of trace element arsenic in high purity nickel by GFAAS].

Determination of Eleven Trace Elements in Chinese Traditional and Herbal Drugs for Relieving Heat and Toxic by FAAS

Determination of Serum Nickel by Zeeman Graphite Furnace Atomic Absorption Spectrometry and Standard Addition with Calibration

Determination of tungsten,nickel,iron and vanadium in cobalt chromium tungsten alloy by inductively coupled plasma atomic emission spectrometry

Contents Determination of Copper in Chinese Traditional Medicines by FAAS

GFAAS DETERMINATION OF TRACE AMOUNTS OF ARSENIC IN HIGH PURITY NICKEL

Determination of Elemental Impurities in Iron-Nickel-Based Superalloys by Glow Discharge Mass Spectrometry