Abstract:In ceramic/metal brazing, high residual stress usually causes fracture in the ceramic substrates. Therefore, composite fillers consisting of ductile matrix featuring low yield strength and elastic modulus, as well as reinforcements featuring low coefficient of thermal expansion (CTE), are employed. However, for AgCuTi-base composite fillers, the reinforcements are likely to weaken the deformability of brazing seams (BS), i.e. increase the elastic modulus and yield stress of BS. To address this issue, we developed a new AgCu-base composite filler with "hedgehog-like" reinforcement clusters. Herein, AgCu + NbB2 composite filler was used to braze ZrB2-SiC and TC4-TiBw, wherein ductile Ag(s,s) and Cu(s,s) dominated BS, thereby ensuring high deformability; in addition, a NbB layer along with limited TiB whiskers was formed at the NbB2/brazes interface with the orientation relationship of (-11-1)NbB//(0-1-1)TiB and [-314]NbB//[12-2]TiB, resulting in "hedgehog-like" reinforcement clusters. This structure exhibited the following advantages: (i) crystallographic misfit at the interface of reinforcement clusters/brazes and the controlled formation of TiB whiskers minimised the conventional fine grain strengthening and dispersion strengthening effects of BS; (ii) isolated reinforcement clusters decelerated the increase in the elastic property of BS; (iii) "hedgehog-like" structure absorbed fracture energy by deflecting cracks; and (iv) the formation of brittle compounds could be avoided. In other words, the designed reinforcement clusters reduced the deformability expense and compensated for the mechanical-resistance of BS. Therefore, the maximum joint strength was obtained with 2 wt% NbB2, which increased the shear strength of the joint six times compared to that with 0 wt% NbB2. For the joints failing inside ceramic substrates, (i) the key factor for limiting joint strength was the residual stress inside ceramics and (ii) the remission of the trade-off between thermal expansion mismatch and deformability expense contributed to relaxing residual stress, thereby confirming the reliability of our design.

Research Progress of Composite Fillers

A Review On Filler Materials For Brazing Of Carbon-Carbon Composites

Recent Advances in Brazing Fillers for Joining of Dissimilar Materials

Brazing ZrO2 Ceramic and TC4 Alloy by Novel WB Reinforced Ag-Cu Composite Filler: Microstructure and Properties

Application of Ag-Cu-Ti active metal composite filler in ceramic joining: a review

Theoretical Study and Numerical Simulation of the Stress Fields of the Al 2 O 3 Joints Brazed with Composite Filler Materials

Improvement for Ti3SiC2/Cu Joint Brazed Using Composite Fillers with Abnormal Expansion Ceramic Particulates

Design of composite filler with hedgehog-like reinforcement clusters for effective stress relief in ceramic/metal joints

Progress, applications, and perspectives of titanium-based braze filler metal: a review

Solid-state Transformation Composite Filler: A New Strategy to Strengthen Ceramic/metal Joint

Nano particle reinforced Ag-base composite brazing filler metal and preparation method thereof

Improvement for Ti 3 SiC 2 /Cu joint brazed using composite fillers with abnormal expansion ceramic particulates

Al2o3/Al2o3 Joint Brazed with Al2o3-Particulate-Contained Composite Ag-Cu-Ti Filler Material

Vacuum Brazing of the C-f/C Composite and Ni Base Superalloy Using MBF 20 Filler

Effect of Holding Time on Microstructure and Mechanical Properties of SiC/SiC Joints Brazed by Ag-Cu-Ti + B4C Composite Filler

Research Progress of Ceramic/Metal Dissimilar Brazing Technology

Development of metalbrazing and carbon fiber reinforced composites

Brazing SiC Ceramic Using Novel B4C Reinforced Ag–Cu–Ti Composite Filler

Optimization of Hybrid Filler in Thermally Conductive Composite Formation

Interfacial Microstructure and Forming Mechanism of Brazing Cf/Al Composite with Al–Si Filler

Microstructure and Performance of the Cu/Al2O3 Joint Brazed with Active Composite Filler