Abstract:Residual stress is a key factor affecting the properties of ceramic/metal brazed joints. In this work, the residual stress of sapphire/Ti6Al4V alloy joints brazed with CuTi+B composite filler after cooling and reheated to 400 °C was calculated by finite element numerical simulation method. The effect of the B content in the filler and the filler thickness on the residual stress distribution of brazed joints after cooling was studied. The results show that the residual stress is mainly concentrated in the area near the filler layer. The maximum von Mises stress is located in the filler layer and a large Z-axial (the direction perpendicular to the brazed surface) tensile stress is on the sapphire near the filler layer. The B content and the filler thickness have no significant effect on the distribution of residual stress, but they have a certain effect on the value of residual stress of the sapphire near the filler layer. The von Mises stress and the Z-axial stress of this area increase with the increase of B content, and they decrease first and then increases with the increase of filler thickness. When the sapphire/Ti6Al4V joint is reheated to 400 °C, its residual stress significantly reduces and the residual stress on the periphery of the filler layer changes from compressive stress to tensile stress. As the B content is 1 and 3 wt%, the sapphire/Ti6Al4V joint with a smaller residual stress can be obtained. The microstructure observation and shear tests of the joints show that cracks appear in the high stress concentration area and the fracture starts from the area with maximum axial tensile stress, which verifies the accuracy of the simulation results.

Theoretical Study and Numerical Simulation of the Stress Fields of the Al 2 O 3 Joints Brazed with Composite Filler Materials

Residual Stress Distribution in Sapphire/Ti6Al4V Alloy Joints Brazed with CuTi+B Composite Fillers

FLEXURAL STRENGTH OF IN-SITU REACTION PROCESSED Al2O3-Al3Ti-Al COMPOSITES

Microstructure and Mechanical Properties of Al2O3/Cu Joints Brazed with Ag–Cu–Ti+Zn Composite Fillers

Numerical Analysis of the Effects of Reinforcing Particles on the Residual Stress of TiB2/Al-Si Composites Fabricated by Laser Powder Bed Fusion

Enhanced Mechanical Properties and Thermal Cycling Stability of Al2O3-4J42 Joints Brazed Using Ag–Cu–Ti/Cu/Ag–Cu Composite Filler

Investigating the effect of WC reinforcements in Cu Ti composite filler on the microstructural evolution and mechanical characteristics in brazing C f /SiC and GH3536

Research of Alumina and Brazing Filler Metal Interface

Brazing Al2O3 to 4J42 Using Ag–Cu–Ti/Cu/BNi-2 Composite Fillers with Different Thicknesses of Cu Interlayer

Residual stress analysis in the Al2O3/Ti 3SiC2 multilayer composites

Effect of Copper Interlayer to the Microstructure and Strength of Alumina/304 Stainless Steel Joint Brazed with Silver‐copper‐titanium Filler

Numerical investigation on the effect of copper filler thickness on the brazed residual stress

A Review On Filler Materials For Brazing Of Carbon-Carbon Composites

Improvement for Ti 3 SiC 2 /Cu joint brazed using composite fillers with abnormal expansion ceramic particulates

Effect of Cu interlayer with different thickness on microstructure and properties of Al2O3/Kovar joints brazed with Cu–Ti/Cu/BNi-2 composite filler

A Comparison of Brazed Residual Stress in Plate–fin Structure Made of Different Stainless Steel

Brazing of C/C composites and 304 stainless steels via Ni/Mo composite interlayer

Brazing of C/C Composite and TiAl Alloy Using TiNiSi Filler Metal Added Cu Interlayer

Microstructural evolution and mechanical property of a SiCf/SiC composite/Ni-based superalloy joint brazed with an Au-Cu-Ti filler

Graphite-reinforced AgCuTi/Cu foam composite filler to braze Al2O3 ceramic and 304 stainless steel

Effect of Ti content on microstructure and mechanical properties of SiCf/SiC composites/GH536 superalloy joints brazed with CoFeCrNiCuTi high entropy filler