Abstract:Residual stress is a key factor affecting the properties of ceramic/metal brazed joints. In this work, the residual stress of sapphire/Ti6Al4V alloy joints brazed with CuTi+B composite filler after cooling and reheated to 400 °C was calculated by finite element numerical simulation method. The effect of the B content in the filler and the filler thickness on the residual stress distribution of brazed joints after cooling was studied. The results show that the residual stress is mainly concentrated in the area near the filler layer. The maximum von Mises stress is located in the filler layer and a large Z-axial (the direction perpendicular to the brazed surface) tensile stress is on the sapphire near the filler layer. The B content and the filler thickness have no significant effect on the distribution of residual stress, but they have a certain effect on the value of residual stress of the sapphire near the filler layer. The von Mises stress and the Z-axial stress of this area increase with the increase of B content, and they decrease first and then increases with the increase of filler thickness. When the sapphire/Ti6Al4V joint is reheated to 400 °C, its residual stress significantly reduces and the residual stress on the periphery of the filler layer changes from compressive stress to tensile stress. As the B content is 1 and 3 wt%, the sapphire/Ti6Al4V joint with a smaller residual stress can be obtained. The microstructure observation and shear tests of the joints show that cracks appear in the high stress concentration area and the fracture starts from the area with maximum axial tensile stress, which verifies the accuracy of the simulation results.

Numerical investigation on the effect of copper filler thickness on the brazed residual stress

Numerical Analysis of Residual Stress for Copper Base Brazed Stainless Steel Plate-Fin Structure

Assessing the Residual Stresses in Dissimilar Welded Joint: Depth-Sensing Indentation Testing and Numerical Simulation

Research on Residual Stress in Copper/Al2O3 Ceramic/Stainless Steel Composite Structure Brazed Joint

A Comparison of Brazed Residual Stress in Plate–fin Structure Made of Different Stainless Steel

3D Numerical Simulation of Brazed Residual Stress in Stainless Steel Plate-Fin Structure

Effect of Geometric Conditions on Residual Stress of Brazed Stainless Steel Plate-Fin Structure

Brazed Residual Stress in a Hollow-Tube Stacking: Numerical Simulation and Experimental Investigation

Finite Element Analysis of Residual Stresses and Thermal Deformation for Brazing Plate-Fin Structure

Effect of Brazing Residual Stress on Creep for Stainless Steel Plate-Fin Structure

Effects of Filler Wire on Residual Stress in Electron Beam Welded QCr0.8 Copper Alloy to 304 Stainless Steel Joints

The Effect of Filler Metal Thickness on Residual Stress and Creep for Stainless-Steel Plate–fin Structure

Numerical Investigation of Deformation and Residual Stress in Vacuum Brazing of Titanium Alloy Plate-Fin Structure

Finite Element Analysis of the Effect of Brazed Residual Stress on Creep for Stainless Steel Plate-Fin Structure

Study on Distribution and Optimization of Residual Stress Inside Plate-Fin Structure after Braze Welding

Finite element prediction of residual stresses and thermal distortion in a brazed plate-fin structure

Residual Stress Distribution in Sapphire/Ti6Al4V Alloy Joints Brazed with CuTi+B Composite Fillers

Numerical investigating the effect of braze processing parameters on residual stresses in an X-type lattice truss sandwich structure

Electromagnetic Ultrasonic Measurement for Welding Residual Stress Detection - Comparison Between Experiment with Numerical Simulation

Modelling of temperature field and residual stress of vacuum brazing for stainless steel plate-fin structure

STUDY ON BRAZING RESIDUAL STRESS OF STAINLESS STEEL WITH ALUMINA BY FINITE ELEMENT METHOD