Abstract:Improvement on oxygen (O2) concentrator using pressure swing adsorption (PSA) technology according to variable product demands is of great significance, which, for instance, provides the key step for success in practical O2 therapy for COVID-19 patients who need to be delivered with a wide flow range (1 – 15 standard liter per minute (SLPM)) of medical O2 (purity >82%). This work studied the individual effects of major PSA process parameters on O2 production performance at the product flow rate of 3.46 – 19.88 SLPM (0.64 – 3.68 SLPM per kilogram of adsorbent (SLPM/kg)), based on a self-designed two-bed PSA unit with a modified Skarstom cycle using Li-LSX zeolite adsorbents. The improvement strategies were accordingly proposed based upon influential mechanisms of each parameter: 1) at lower product flow rates (≤2.00 SLPM/kg), increasing the purge flow rate and decreasing the adsorption pressure to suppress excess O2 adsorption, and decreasing the feed flow rate to ensure low energy consumption; 2) at higher product flow rates (≥2.00 SLPM/kg), decreasing the purge flow rate and increasing the adsorption pressure to eliminate N2 breakthrough and O2-rich product waste, and appropriately increasing the feed flow rate to enhance cost-effectiveness. An improved set of parameters (at 3.46 – 19.88 SLPM) rendered O2 purity (95.67 – 74.86%), recovery (11.28 – 49.05%), productivity (0.47 – 2.04 mmol/kg/s) increased by up to 3.52 – 20.08%, 0.36 – 20.47%, 6.82 – 19.61%, and energy consumption (4.07 – 0.95 kWh/kgO2) decreased by up to 10.56 – 18.10%, respectively, in comparison to two conventional sets. The results are beneficial for realizing intellectualized and flexibly-controlled O2 concentrators for practical applications.

Mathematical Simulation on the PSA Process of a Special Miniature Oxygen Concentrator for SARS Patients:Simulation Results and Analysis

Modelling and Simulation of Two-Bed PSA Process for Separating H2 from Methane Steam Reforming

Numerical Simulation of PSA Process for Nitrogen Production from Air

Experimental study on oxygen concentrator with wide product flow rate range: individual parametric effect and process improvement strategy

Evaluation of oxygen separation from air by pressure/vacuum swing adsorption

Oxygen Enrichment Through Mini-Scale Rotary Six-Bed Pressure Swing Adsorption

To the problem of forming the equation system for pressure swing adsorption mathematical model

Psa process for nitrogen production from air

Nonisothermal Adsorption Model for Molecular Sieve Oxygen Concentrator(MSOC)

Optimization of helium/methane adsorption separation process based on Aspen Adsorption simulation

Experiments and simulations on on-board oxygen generation system

Study of Modeling for Fixed-Bed Adsorption Process and Simulation in Experimental CO Separation Through PSA

Research on Absorption Process of Molecular Sieve for Oxygen Generator

Simulation and Optimization of Pressure Swing Adsorption Process for High-Temperature Air Separation by Perovskite Sorbents

Correlations Between Adsorbent Characteristics and the Performance of Pressure Swing Adsorption Separation Process

CFD Simulation for Separation of Carbon Dioxide-Methane Mixture by Pressure Swing Adsorption

Application of Molecular Sieve Oxygen Generation Mini-plant under Harsh Environment

Plateau-Adapted Single-Pump, Single-Bed Vacuum Pressure Swing Adsorption Oxygen Generation Process Simulation and Optimization

Simulation and Energy Consumption Comparison of Gas Purification System Based on Elevated Temperature Pressure Swing Adsorption in Ammonia Synthetic System

Modeling of Energy-Saving VPSA Cycle for Oxygen Enrichment

The Production of Industrial-Grade Oxygen from Air by Pressure Swing Adsorption