Experimental study on oxygen concentrator with wide product flow rate range: individual parametric effect and process improvement strategy
Quanli Zhang,Yingshu Liu,Ziyi Li,Penny Xiao,Wenhai Liu,Xiong Yang,Yaoguo Fu,Chunyu Zhao,Ralph T. Yang,Paul A. Webley
DOI: https://doi.org/10.1016/j.seppur.2021.118918
IF: 8.6
2021-11-01
Separation and Purification Technology
Abstract:<p>Improvement on oxygen (O<sub>2</sub>) concentrator using pressure swing adsorption (PSA) technology according to variable product demands is of great significance, which, for instance, provides the key step for success in practical O<sub>2</sub> therapy for COVID-19 patients who need to be delivered with a wide flow range (1 – 15 standard liter per minute (SLPM)) of medical O<sub>2</sub> (purity >82%). This work studied the individual effects of major PSA process parameters on O<sub>2</sub> production performance at the product flow rate of 3.46 – 19.88 SLPM (0.64 – 3.68 SLPM per kilogram of adsorbent (SLPM/kg)), based on a self-designed two-bed PSA unit with a modified Skarstom cycle using Li-LSX zeolite adsorbents. The improvement strategies were accordingly proposed based upon influential mechanisms of each parameter: 1) at lower product flow rates (≤2.00 SLPM/kg), increasing the purge flow rate and decreasing the adsorption pressure to suppress excess O<sub>2</sub> adsorption, and decreasing the feed flow rate to ensure low energy consumption; 2) at higher product flow rates (≥2.00 SLPM/kg), decreasing the purge flow rate and increasing the adsorption pressure to eliminate N<sub>2</sub> breakthrough and O<sub>2</sub>-rich product waste, and appropriately increasing the feed flow rate to enhance cost-effectiveness. An improved set of parameters (at 3.46 – 19.88 SLPM) rendered O<sub>2</sub> purity (95.67 – 74.86%), recovery (11.28 – 49.05%), productivity (0.47 – 2.04 mmol/kg/s) increased by up to 3.52 – 20.08%, 0.36 – 20.47%, 6.82 – 19.61%, and energy consumption (4.07 – 0.95 kWh/kgO<sub>2</sub>) decreased by up to 10.56 – 18.10%, respectively, in comparison to two conventional sets. The results are beneficial for realizing intellectualized and flexibly-controlled O<sub>2</sub> concentrators for practical applications.</p>
engineering, chemical