Abstract:Metal additive manufacturing (AM) can be achieved by first extruding polymer-based filaments with densely filled metal particles to create the so-called 'green' parts and then experiencing debinding and sintering to produce finished metal components. As a critical step, sintering governs the shape dimension, relative density, and resultant strength of final parts. Thus, there is a growing need for research on understanding and quantifying the sintering-induced anisotropic shrinkage. In this work, the underlying behaviors of anisotropic shrinkage during the entire sintering of extrusion-printed stainless steel 316L parts will be understood and quantified through a combination of theoretical study and experimental investigations including three-directional dilatometry, scanning electron microscopy, and X-ray computed tomography. The three-dimensional size evolution of 'brown' parts before sintering will be studied through a macroscopic analysis of shrinkage anisotropy factors and microstructure characterizations. Different filling strategies will be integrated with initial pore distribution characterization for anisotropic dimensional change analysis. The heterogeneous pore distribution will be discussed in conjunction with the anisotropic viscous behavior to eventually unveil the shrinkage performance in the course of sintering. The findings of this work will provide insights into the anisotropic sintering mechanisms and fill the knowledge gap of the relations between extrusion-based metal AM process and sintered structures of metal alloys.

Investigation on Shrinkage of Parts Made by SLS

Model of Shrinking and Curl Distortion for SLS Prototype S

Investigation into the shrinkage in Z-direction of components manufactured by selective laser melting (SLM)

Investigation of the influence of 3D printing modes with ceramics and sintering on the shrinkage process of thin-walled models

Numerical Model and Experimental Validation for Laser Sinterable Semi-Crystalline Polymer: Shrinkage and Warping

Study on the Effect of Photocuring Resin Shrinkage on Parts Curl Distortion in the Process of Laser Rapid Prototyping

Investigation of the Part Deformation in Stereolithography

Nanoparticle Surface Premelting-Induced Low-Temperature Sintering and Large Shrinkage of Particle Beds in Additive Manufacturing

ShrinkyKit: 3D Printing Shrinkable Adaptations for Everyday Objects

Investigation on Preheating Process in SLS Machine

Effect of Dynamic Injection Molding Process Parameters on Shrinkage of Parts

Investigation of Mold Temperature Affecting on Shrinkage of Rapid Heat Cycle Molding Plastic Part

Experimental research on injection molding shrinkage characteristics of plastic parts

RESEARCH ON INJECTION MOLDING SHRINKAGE CHARACTERISTICS OF FAN-SHAPED PLASTIC PARTS

Anisotropic sintering shrinkage behavior of stainless steel fabricated by extrusion-based metal additive manufacturing

Numerical and Experimental Analysis of Anisotropic Shrinkage During Sintering

Shrinkage Effects in Photopolymerizable Resin containing Polymer Filler for SL

Design for the reduction of volume shrinkage-induced distortion in digital light processing 3D printing

Process Parameters Appraisal of Fabricating Ceramic Parts Based on Stereolithography Using the Taguchi Method

Influence of Complex Structure on the Shrinkage of Part in Investment Casting Process