Abstract:The air rudder skeleton has an asymmetric complex structure with high casting difficulty, making defects such as shrinkage porosity easy to develop during the casting. Based on the structural analysis, a finite element model of the Ti48Al48Cr2Nb2 (at%), i.e., Ti-33.35Al-2.68Cr4.79Nb (wt%), alloy skeleton has been developed by ProCAST software to study its centrifugal investment casting process. In this work, an orthogonal modeling with 4 factors and 3 levels was designed to investigate the influence of process parameters on shrinkage porosity and thus to develop the casting process that is suitable for air rudder skeleton. The optimization scheme was studied in terms of the filling and solidification processes as well as the casting defects, especially in the formation mechanism of shrinkage porosity. The results show that the shrinkage porosity is mainly located at the intersection of stiffeners and near the junction between the ingate and the casting, as a result of a small heat dissipation area for the above positions, which tends to form isolated liquid-phase zones. The formation of the isolated liquid phase in the frame is closely related to the large number of columnar grains and a few equiaxed grains working together to form a grain frame that hinders melt flow, whereas its formation in the solid region is mainly due to a closed area formed by generous equiaxed grains. Finally, the simulation of stress concentration was implemented for optimization of the shakeout time to avoid cracking, and the result was 1300–2220 s.

Influence of Complex Structure on the Shrinkage of Part in Investment Casting Process

Simulation Analysis of Thermal Stress During Casting Process of Large-Sized Alloy Steel Ingot

Die Structure Optimization of Aluminum Alloy Wheel Low-Pressure Die Casting Based on CAE

Optimization of process parameters to improve dimensional accuracy of investment casting using Taguchi approach

Numerical Simulation and Optimization of Investment Casting for Complex Thin-walled Castings

An investigation of ceramic shell thickness uniformity and its impact on precision in turbine blade investment casting

Numerical Simulation of Vacuum Investment Casting Cartridge Receiver

Study on Investment Casting Process Based on Ice-Model

Numerical Simulation and Optimization of Indirect Squeeze Casting Process

Numerical Simulation for the Investment Casting Process of a Large-Size Titanium Alloy Thin-Wall Casing

Modeling of Investment Casting of Ti48Al48Cr2Nb2 (at%) Alloy Air Rudder Skeleton

Effects of Process Parameters on Shrinkage Porosity in 357 Semi-Solid Die Casting Parts

Integrated Numerical Simulations and Experimental Measurements for the Sintering Process of Injection-Molded Ti-6Al-4V Alloy

Continuous Casting Mould for Square Steel Billet Optimised by Solidification Shrinkage Simulation

Computer-Aided Engineering (CAE) Simulation for the Robust Gating System Design: Improved Process for Investment Casting Defects of 316L Stainless Steel Valve Housing

Optimization of low-pressure die casting process parameters for reduction of shrinkage porosity in ZL205A alloy casting using Taguchi method

Investigation and Application of Inverse Determination of Interfacial Heat Transfer Coefficient in Vacuum Investment Casting

Production of Ceramic Investment Casting Shells Using Lithography-Based Ceramic Manufacturing and Binder Jetting Technology

Dimensional control of ring-to-ring casting with a data-driven approach during investment casting

Modeling of Shrinkage Cavity Formation and Proces s Improvement of S.G.Iron Hub Casting

Macro and Micro Modeling on Conventional and Unidirectionally Solidified Investment Castings