Abstract:Rock bolt foundation is becoming increasingly popular for transmission line engineering in mountainous areas due to the ability to maximize rock foundation bearing performance, reduce foundation size and burial depth, and save investment. However, failure modes such as pull-out of bolt can lead to insufficient utilization of bearing capacity of rock bolt. To overcome this problem, a new form of expanding shell bolt is proposed and the effect of several variables including grouting materials, bolt diameter, site weathering degree, and anchoring depth are investigated in this study. The results indicate that the new expanding shell bolt may significantly increase the pull-out bearing capacity compared to common rock bolts, due to the built-in effect between the bottom part of bolt and the rock on the hole wall. The effect of grouting material and anchoring length on the shell anchor's uplift bearing capacity is minimal. Considering that the ultimate tensile strength when the anchor bar breaks depends on the diameter of the steel bar, increasing the diameter of the anchor bar will effectively improve the pull-out characteristics of the bolt. The failure mode of anchor rods is also influenced by the rock layers. Rock layers with lower weathering levels have stronger embedding force, and the expansion head can effectively play a role. Due to the group anchor effect, the ultimate uplift bearing capacity of group anchor foundation in rocks is not simply the sum of the bearing capacity of each one, but must be multiplied by the group anchor coefficient. This coefficient is close to 0.9 in moderately weathered and strong-medium weathering sites. Finally, the calculation method for ultimate pullout force of expanding shell bolt is established. The feasibility of this method is verified by comparing on-site test values and calculated values. Author keywords : Rock bolt; Expanding shell bolt; Pull-out bearing capacity; Failure mode; Group anchor effect.

THE PULL -OUT EXPERIMENT STUDY AND THEORITIAL ANALYSIS OF EXPANSION BUILDING ANCHORS IN CONCRETE

Experimental research on the strength of concrete mearsured by limpet

TESTING STUDY ON DIVING DRY-VIBRATED COMPACTED AND ANTI-PULL STONE COLUMN

THEORETICAL ANALYSIS OF BOLT PULLOUT BASED ON PERFECT ELASTO-PLASTIC MODEL

Expansion and Pull-Out Simulation Test of Self-expanding Bond Bolts in Adjacent Rock Bodies with Varied Stiffnesses

Behaviour and in Situ Tests of Self-Drilling Prestressed Anchors

STUDY ON GLUING-PULLING METHOD FOR CONCRETE STRENGTH TEST

Enhanced finite element analysis of shear connector pull-out based on cohesive zone model

Bolt Pull-Out Tests of Anchorage Body under Different Loading Rates

Analysis of elastic torsion stress for steel tubular members filled with centrifugal concrete

3D Analysis of Anchor Bolt Pullout in Concrete Materials Using the Non-Ordinary State-Based Peridynamics

Pull-Out Performance of Anchored Carbon-Fiber Bundles in Cementitious Matrix

Behaviors and application of self-drilling pre-stressed anchors

Analytical Solution and Experimental Verification of Pullout Force of Twisted Steel Fibers in Ultra-High Performance Concrete

Laboratory Model Test Study of Tunnel Anchor

Experimental study on the bond behavior of deformed bars embedded in concrete subjected to lateral tension

Performance Tests on Pressure-Dispersed Compression Anchors in Cohesive Soils

Pull-out Model Test for Tunnel Anchorage and Numerical Analysis

RESEARCH ON ANCHORAGE EFFECTS OF FULLY CEMENT-IMBEDDED OUTSIDE-CONNECTED ROCK BOLTS AND ELASTIC-CONNECTED ROCK BOLTS IN ANTI-EXPLOSION REINFORCEMENT MODEL TEST

Field experimental study on the pull-out characteristics of a new type of expanding shell bolt

Field and Laboratory Investigation of Pullout Resistance of Steel Anchors in Rock