Abstract:The non-ordinary state-based peridynamics (NSPD) is a promising method for fracture analysis, and it can incorporate the constitutive relationship of classical continuum mechanics in peridynamics. However, the high computational cost is one of the main reasons limiting its usage. To improve computational efficiency of NSPD, a stability-enhanced peridynamic (PD) element is proposed to couple NSPD with finite element method (FEM), primarily for fracture analysis. Only the areas where cracks may initiate or propagate are solved with the proposed PD element, while the rest of the model is composed of conventional finite elements. The main feature of the proposed PD element is attributed to that the bond interaction does not have to be parallel to the bond direction in NSPD, and the stability of the element is enhanced by introducing the improved hourglass method into the element to restrain the instability due to the zero-energy mode. Based on the equation of motion of NSPD and the principle of virtual work of the PD element, the stiffness matrix of the PD element is derived and the coupled NSPD and FEM method with a global stiffness matrix is thus established. Meanwhile, a two-step interface correction method is developed to improve the accuracy at the interface of the two domains. Subsequently, to verify the proposed coupling method, the uniaxial tension of a strip plate, the propagation of longitudinal wave, the compact tension test of a steel plate, and the single edge notched tension test of an orthotropic lamina are simulated. With the proposed coupling method, the fracture process is accurately simulated, while the computing time is significantly reduced by up to more than 80% when compared with the one using NSPD alone. Moreover, with the constitutive relationship represented by the elastic tensor, the orthotropic materials can be easily modeled in the proposed PD element, and the stress-based criteria can be used with minor modifications. The proposed coupled NSPD and FEM method has high accuracy, computational efficiency, and convenience, and it has the potential to be a useful tool for quantitative analysis of complex engineering fracture problems.

3D Analysis of Anchor Bolt Pullout in Concrete Materials Using the Non-Ordinary State-Based Peridynamics

Numerical Study of Quasi-Static to Dynamic Pullout Capacity of Anchors in Sand

Enhanced finite element analysis of shear connector pull-out based on cohesive zone model

Experimental and numerical study of large high strength bolt shear connector embedded in HFRC

Bolt Pull-Out Tests of Anchorage Body under Different Loading Rates

Numerical Investigations on Pore-Pressure Response of Suction Anchors under Cyclic Tensile Loadings

PHYSICAL MODELLING OF TIME DEPENDENT PULLOUT BEHAVIOR ASSOCIATED WITH GFRP ANCHOR

Anchorage failure mechanism and uplift bearing capacity of L- & J-anchor bolts in plain concrete

Pull-out Model Test for Tunnel Anchorage and Numerical Analysis

Study on reasonable anchorage length based on failure mechanism of the bolt anchorage system

Micro-Numerical Simulation of Anchorage Performance for Geotechnical Anchored Structure by Particle Flow Code

Stress analysis of full-length grouted bolt under shear deformation of anchor interface

Three-dimensional limit variation analysis on the ultimate pullout capacity of the anchor cables based on the Hoek-Brown failure criterion

Acoustic emission parametric analysis to investigate the damage evolution of anchor systems designed by the concrete capacity design method

Numerical Simulation of Anchorage Performance of GFRP Bolt and Concrete

THEORETICAL ANALYSIS OF BOLT PULLOUT BASED ON PERFECT ELASTO-PLASTIC MODEL

A Non-Ordinary State-Based Peridynamic Formulation for Failure of Concrete Subjected to Impacting Loads

A Novel Numerical-Iterative-approach for Strain-Softening Surrounding Rock Incorporating Rockbolts Effectiveness and Hydraulic-Mechanical Coupling Based on Three-Dimensional Hoek-Brown Strength Criterion

Pull-out behavior of the pre-installed lifting anchor with supplementary reinforcement for the precast concrete segments of wind turbine hybrid towers

Numerical investigation of pull-out capacity and failure mechanism of suction anchors with mooring line in sand

A stability-enhanced peridynamic element to couple non-ordinary state-based peridynamics with finite element method for fracture analysis