Abstract:Rock bolt foundation is becoming increasingly popular for transmission line engineering in mountainous areas due to the ability to maximize rock foundation bearing performance, reduce foundation size and burial depth, and save investment. However, failure modes such as pull-out of bolt can lead to insufficient utilization of bearing capacity of rock bolt. To overcome this problem, a new form of expanding shell bolt is proposed and the effect of several variables including grouting materials, bolt diameter, site weathering degree, and anchoring depth are investigated in this study. The results indicate that the new expanding shell bolt may significantly increase the pull-out bearing capacity compared to common rock bolts, due to the built-in effect between the bottom part of bolt and the rock on the hole wall. The effect of grouting material and anchoring length on the shell anchor's uplift bearing capacity is minimal. Considering that the ultimate tensile strength when the anchor bar breaks depends on the diameter of the steel bar, increasing the diameter of the anchor bar will effectively improve the pull-out characteristics of the bolt. The failure mode of anchor rods is also influenced by the rock layers. Rock layers with lower weathering levels have stronger embedding force, and the expansion head can effectively play a role. Due to the group anchor effect, the ultimate uplift bearing capacity of group anchor foundation in rocks is not simply the sum of the bearing capacity of each one, but must be multiplied by the group anchor coefficient. This coefficient is close to 0.9 in moderately weathered and strong-medium weathering sites. Finally, the calculation method for ultimate pullout force of expanding shell bolt is established. The feasibility of this method is verified by comparing on-site test values and calculated values. Author keywords : Rock bolt; Expanding shell bolt; Pull-out bearing capacity; Failure mode; Group anchor effect.

THEORETICAL ANALYSIS OF BOLT PULLOUT BASED ON PERFECT ELASTO-PLASTIC MODEL

Models to Predict Shear Resistances of Anchor Bolts

Analytical Elastic Solution of Earth Pressure in Deep-Buried Pipe

Experimental Study of Shear Behavior of Anchor Bolt Connections at Steel Column Bases

Analysis of Stability Against Upheaval of Deep Excavation by Upper Bound Method with a Consideration of Confined Water

An analytical analysis of the full-range behaviour of grouted rockbolts based on a tri-linear bond-slip model

Field experimental study on the pull-out characteristics of a new type of expanding shell bolt

ANALYTICAL SOLUTION FOR THE LOAD-DISPLACEMENT RELATIONSHIP OF PULLOUT DX PILE BASED ON ELASTIC THEORY

3D Analysis of Anchor Bolt Pullout in Concrete Materials Using the Non-Ordinary State-Based Peridynamics

Stress analysis of full-length grouted bolt under shear deformation of anchor interface

Analysis of Stability Against Upheaval of Excavation by Upper Bound Method Considering the Retaining Wall

Analytical studying the axial performance of fully encapsulated rock bolts

Base Stability Analysis of Braced Deep Excavation in Undrained Anisotropic Clay with Upper Bound Theory

Numerical analysis of active earth pressure on rigid retaining wall

A novel constitutive law of confined grouted rock bolt under pull-out load based on a fully nonlinear bond-slip model

Theoretical Model to Predict Pulling Forces for Horizontal Directional Drilling Installations

A cavity expansion theory-based hyperbolic model for the pull-out force of a compaction-grouted soil nail

Research on the Stress Distribution Law of Fully Anchored Bolt and Analysis of Influencing Factors under the Condition of Surrounding Rock Deformation

Study on reasonable anchorage length based on failure mechanism of the bolt anchorage system

The control effect of surrounding rock with different combinations of the bolt anchoring lengths and pre-tightening forces in underground engineering

A Semi-Analytical Model for a Compaction-Grouted Soil Nail with Double Grout Bulbs Considering Compaction Effect in Sand