Abstract:Summary High drag and torque on drillstring and difficulty in hole cleaning are two major challenges in extended-reach drilling, and these two challenges are usually coupled with each other. However, previous studies considered the drillstring mechanics and hole cleaning as two relatively independent issues and studied them separately, which cannot fully reveal the complex mechanisms of pipe sticking and obtain proper drilling parameters to ensure hole cleaning and reduce drag and torque. To solve this problem, in this paper we present the concept of pipe-cuttings interaction and elaborate on the two interaction mechanisms, which are the effect of pipe rotation on cuttings transport and the effect of cuttings distribution on pipe load. Second, we introduce the stirring diffusion factor and pipe-cuttings contact stress to quantify the pipe-cuttings interaction, and we obtain their mathematical expressions through nonlinear regression of numerical simulation results. Third, we establish the mechanical pipe-cuttings interaction model by modifying and combining the tubular mechanical model and the cuttings transport model. Finally, we validate the interaction model and apply it to a case study of extended-reach drilling in the South China Sea. The results show that the interaction model is of high prediction accuracy and is superior to the conventional tubular mechanical and cuttings transport models because the interaction between pipe rotation and cuttings transport is sufficiently considered. The problem of poor hole cleaning for a 121⁄4-in. section is serious, and pipe sticking occurs frequently for the extended-reach well in the case study because the stationary bed height is more than 10% in actual drilling. It is usually difficult to ensure hole cleaning of a 121⁄4-in. section by only optimizing a single parameter of rate of penetration (ROP), flow rate, or rotational speed, but optimizing two of the parameters at the same time can achieve better results. Lastly, we establish a recommended chart of drilling parameters, which can aid engineers in making comprehensive recommendations on drilling parameters.

Theoretical Model to Predict Pulling Forces for Horizontal Directional Drilling Installations

Determination of Pipe Pullback Loads in Horizontal Directional Drilling Using an Advanced Computational Dynamic Model

Assessment Model of Pipe–soil Interaction During Large-Amplitude Lateral Displacements for Deep-Water Pipelines

Modeling Cyclic Embedment of Deep-Water Pipelines Using Large Displacement Limit Analysis

Load Transfer of Offshore Open-Ended Pipe Piles Considering the Effect of Soil Plugging

ANALYSIS OF STABILITY FAILURE FOR PIPELINE DURING LONG DISTANCE PIPE JACKING

Prediction Model of Mechanical Extending Limits in Horizontal Drilling and Design Methods of Tubular Strings to Improve Limits

Prediction for Response of Adjacent Pipelines Induced by Pipe Jacking Construction

Dynamic modeling and load transfer prediction of drill-string axial vibration in horizontal well drilling

Analytical Analysis of Pipeline–soil Interaction During J-lay on a Plastic Seabed with Bearing Resistance Proportional to Depth

Analysis of Additive Load of Pipe Jacking Construction on Adjacent Pile

A Multiparameter Coupled Prediction Model for Annular Cuttings Bed Height in Horizontal Wells

Prediction of Friction Resistance for Slurry Pipe Jacking

Drill string’s axial force transfer law in slide directional drilling in underground coal mine

Interaction between Pipe Rotation and Cuttings Transport in Extended-Reach Drilling: Mechanism, Model, and Applications

Research on a Calculation Model of Cable Tension and Pumping Displacement of a Logging Tool String of Horizontal-Well Drillpipes

Numerical analysis of running resistance of a completion string with packers and sliding sleeves in horizontal wells

Calculation of Friction Force for Slurry Pipe Jacking considering Soil-Slurry-Pipe Interaction

Calculation and Analysis of Soil Deformation Induced by Lubrication Mud Pressure During Pipe Jacking Construction

New Model and Finite Element Analysis of the Anti-Extrusion Strength of Backfill Drilling Pipelines

Frictional resistance calculation and jacking force prediction of rectangular pipe jacking