Abstract:Pipe jacking is a trenchless construction method to achieve forward tunneling and efficient construction of underground structure simultaneously without extensive surface excavation. In the process of pipe jacking construction, the jacking force provided by the hydraulic jacking equipment must overcome the frontal resistance of the cutter head and the frictional resistance between the pipe sections and formation at the same time. In particular, the pipe-soil frictional resistance increases with the increases of jacking distance, buried depth, pipe diameter and the complexity of jacking trajectory. Therefore, it is very important to correctly estimate jacking force in trenchless jacking engineering practice for the smooth implementation of pipe jacking, operation risk and comprehensive cost control. Firstly, the stress states of jacking circular and rectangular pipe sections in the soil are analyzed, and the key influencing factors of their pipe-soil frictional resistance are obtained respectively. Then, the pipe-soil frictional resistance of jacking the circular and rectangular pipe sections with the same external surface area in the dry sandy soil and coal granular layer are tested separately by using the self-developed multifunctional experimental apparatus during trenchless pipe jacking. The results show that the pipe-soil frictional resistances of jacking circular and rectangular pipe sections in the coal granular layer are always smaller than that in the sandy soil under the same experimental conditions, and the corresponding fitting calculation equation of pipe-soil frictional resistances are obtained respectively. Meanwhile, the modified calculation methods of the above pipe-soil frictional resistances are proposed respectively based on the relationship between the lateral pressure coefficient K and the buried depth of pipe section H . Moreover, the disturbed area of soil in the upper part of jacking circular pipe section presents an arc distribution, while the disturbed area of soil in the upper part of jacking rectangular pipe section presents a slightly concave distribution. Due to the different disturbance conditions of soil around the pipe section, the lateral pressure coefficient K should be corrected in the calculation equations of pipe-soil frictional resistance of jacking circular and rectangular pipe sections based on the discrete element numerical simulation analysis by EDEM software. Finally, the pipe-soil frictional resistances obtained by different methods in the sandy soil are compared and analyzed. The calculated values of the modified theoretical calculation method are very close to the experimental test values, while the other methods are smaller than the experimental test values, which makes the rationality of the modified theoretical calculation method of pipe-soil frictional resistance is verified, and some suggestions are also put forward for the value of some coefficients in the relevant empirical estimation equations. The above research achievements systematically compared the states of pipe-soil frictional resistances of jacking circular and rectangular pipe sections based on different research methods, especially for the correct evaluation of jacking force during trenchless pipe jacking, they could provide some valuable references and effective guidance for the subsequent research, engineering practice and further development of trenchless pipe jacking technology.

Calculation of Friction Force for Slurry Pipe Jacking considering Soil-Slurry-Pipe Interaction

Prediction of Friction Resistance for Slurry Pipe Jacking

Frictional resistance calculation and jacking force prediction of rectangular pipe jacking

Analysis and Application of Friction Calculation Model for Long-Distance Rock Pipe Jacking Engineering

Influence of Slurry Diffusion on Drag Reduction During Pipe Jacking Cnstruction

Study on calculation methods of ground deformation induced by pipe jacking construction

Study on Calculating Methods of Soil Vertical Deformation Induced by Pipe Jacking Construction

Calculation and Analysis of Soil Deformation Induced by Lubrication Mud Pressure During Pipe Jacking Construction

Comparative research on the pipe-soil frictional resistances of circular and rectangular pipe sections during trenchless pipe jacking

Research on Mechanism of Reducing Friction Through Injecting Slurry in Pipe Jacking

Influence of the Advance Jacked Pipe on the Jacking Force of the Subsequent Pipe Based on Pipe–Soil Full Contact Model

Analysis of Superimposed Load Induced by Propulsion of Adjacent Level Parallel Pipe-Jacking

Analytical Analysis of Pipeline–soil Interaction During J-lay on a Plastic Seabed with Bearing Resistance Proportional to Depth

Study on Soil-Compacting Effects Induced by Pipe Jacking Construction

A new calculation method for the response of active-passive bridge piles considering pile-soil interface friction

Analysis of Additive Load of Pipe Jacking Construction on Adjacent Pile

Design and Analysis of Grouting Pressure in Slurry Pipe Jacking Based on the Surrounding Soil Stability Mechanical Characteristics

Analytical model of vertical load acting on jacked pipe considering soil arching effect in cohesionless soil

Effect of Lubrication Strength on Efficiency of Slurry Pipe Jacking

A New Method to Estimate and Predict the Variation of Dry Friction Coefficient in Ultra-Long Distance Rock Pipe Jacking: A Case Study in Guanjingkou

Analysis of additional load on adjacent underground pipeline induced by pipe jacking construction