Abstract:The soil–anchor interface mechanical behavior is of practical importance for the bearing performance of ground anchors. Element-scale pullout test is a simple, reliable, and economical technique to investigate the interface shear stress–displacement response of anchors. However, the influence range of boundary effect for the anchoring element-scale pullout specimens is poorly understood, particularly under the actual stress and construction conditions. In addition, there is still a lack of study on the mechanical behavior of soil–anchor interface subjected to ground pressure via element-scale pullout test. In this paper, an element-scale pullout test setup that can simulate ground pressure and construction method of ground anchors was specially developed, with details introduced carefully. A response surface function-based soil dry density prediction model was proposed for the test design. Comparison with the soil consolidation test results indicates that this model equipped with high fitting and prediction accuracy. Twenty groups of element-scale pullout tests with different ground pressures and anchor diameters were conducted. Based on the test design of the proposed model, the soil density and moisture content were almost the same for all specimens after consolidation. The shrinkage of anchor hole, interface shear stress–displacement response, and interface shear strength were discussed adequately. It is shown that the soil–anchor interface shear strength is hardly dependent on ground pressure under the actual construction method of anchors. The influence of boundary effect for the element-scale pullout test can almost be eliminated when diameter ratio of specimen to anchor exceeds 5.0 ~ 6.7.

Performance Tests on Pressure-Dispersed Compression Anchors in Cohesive Soils

Consolidation Solution for Composite Foundation Considering A Time- and Depth-Dependent Stress Increment along with Three Distribution Patterns of Soil Permeability

In-situ test of bearing capacity behavior of composite foundation with rigid-flexible piles

Element-scale pullout test study on the mechanical behavior of grouted anchor–soil interface subjected to ground pressure

Behaviour and in Situ Tests of Self-Drilling Prestressed Anchors

Field and Laboratory Investigation of Pullout Resistance of Steel Anchors in Rock

Behaviors and application of self-drilling pre-stressed anchors

Interface stress relaxation behavior of grouted anchors in red clay: experimental study and a disturbed state concept-based theoretical model

Full-Scale Field Test On Retaining Structure Enhanced With Soil Nails And Prestressed Anchors

Anisotropic and Noncoaxial Behavior of K0-Consolidated Soft Clays under Stress Paths with Principal Stress Rotation

Testing and Modeling the Behavior of Pre-Bored Grouting Planted Piles under Compression and Tension

Numerical Investigations on Pore-Pressure Response of Suction Anchors under Cyclic Tensile Loadings

Study on the Performance of Full-Length Pre-Stressed Anchor Bolts

Field Behavior of Pre-Stressed High-Strength Concrete Nodular Piles and PHC Pipe Piles Under Compression in Soft Soil Areas

Compression/tension Load Capacity of Stone Column Anchors

Effect of Cemented Soil Properties on the Behavior of Pre-Bored Grouted Planted Nodular Piles under Compression

Performance of Static Drill Rooted Nodular Piles under Compression

In-Situ Test and Numerical Simulation of Anchoring Performance of Embedded Rock GFRP Anchor

A Field Investigation of Pullout Resistance of Steel Anchors in Rock

BEHAVIOR OF PORE WATER PRESSURE IN DYNAMIC TRIAXIAL TESTS OF SATURATED SOFT CLAY AND ITS EFFECT ON EFFECTIVE STRESS PATH

Study of Pullout Bearing Capacity of Diving Dry-Vibrated Compacted and Anti-Pull Stone Column