Abstract:Thermal loading is an important factor that could lead to the weakening and deterioration of rock materials. Understanding the thermal properties of rocks and their evolution under different high temperatures is important in the post-fire-hazard evaluation and cultural heritage conservation. Yet it is challenging to understand the evolution of thermally-induced changes in rock properties and to quantitatively study degrees of thermal damage when samples are limited. This study investigates the effects of high temperatures (i.e., 200 °C, 400 °C, 600 °C, 800 °C, and 1000 °C) on a dolomitic marble using combined mesoscopic and macroscopic testing techniques. The test results show that increasing marble temperature led to a deterioration of physical properties (i.e., increasing open porosity and weight loss; but decreasing P-wave velocity) and mechanical properties (i.e., increasing axial strain corresponding with the peak stress; but decreasing uniaxial compressive strength, Young's modulus, and brittleness). There existed a threshold temperature of 600 °C, which marks different thermal damage mechanisms. Below the threshold, the rock deterioration was mainly caused by physical changes such as crack propagation and grain breakage, which can be characterized by mesoscopic parameters (i.e., linear crack density and mineral grain size distribution). On the contrary, when the temperature was higher than the threshold, the deterioration was caused by chemical changes, including mineral decomposition and re-crystallization, which was indicated by the changes in mineral compositions and relative atomic mass calculation. Based on the experimental results (e.g., mineralogical and physico-mechanical changes) and obtained relationships between the parameters in mesoscale and macroscale, a novel scheme for thermal damage evaluation is proposed to estimate thermally-induced changes in macroscopic parameters (e.g., Young's modulus) based on the corresponding mesoscopic parameters (e.g., particle size distribution and linear crack density).

Experimental Research on Ultrasonic Characteristic of Marble under the Action of High Temperature

Experimental Study on High Temperature Effect's Influence to the Strength and Deformation Quality of Marble

Experimental Study on Whole Stress-Strain Characteristic of Marble under the Action of High Temperature

TEST RESEARCH ON MECHANICAL PROPERTIES OF MARBLE UNDER HIGH TEMPERATURE

Anisotropy Response Characters of Marble After High Temperature

A novel true triaxial test device with a high-temperature module for thermal-mechanical property characterization of hard rocks

Experimental Study on Infrared Temperature Characteristics and Failure Modes of Marble with Prefabricated Holes under Uniaxial Compression

Experimental study on the variation of physical and mechanical of rock after high temperature treatment

Experimental Study on Ultrasonic Properties of Sandstone Before and after High Temperature

Preparing rock samples using high temperature heating damage method and its application

Experimental Study on Mechanical Behaviors and Fracture Features of Coarse Marble Specimens after Thermal Shock

Experimental Study on Mechanical and Porous Characteristics of Limestone Affected by High Temperature

Mesoscopic and macroscopic investigation of a dolomitic marble subjected to thermal damage

Experimental investigation on damage characteristics and fracture behaviors of granite after high temperature exposure under different strain rates

Pore, mechanics and acoustic emission characteristics of limestone under the influence of temperature

Experimental Study on Dynamic Mechanical Properties and Energy Evolution Characteristics of Limestone Specimens Subjected to High Temperature

Experimental Study of the Mechanical and Acoustic Emission Characteristics of Sandstone by Using High-Temperature Water-Cooling Cycles

Temperature-dependent evolution of permeability and pore structure of marble under a high-temperature thermo-hydro-mechanical coupling environment

Experimental study of the influence of temperature and cooling method on dynamic mechanical properties and damage of granite

The impact of high temperature on mechanical properties and behaviors of sandstone

Laboratory Investigation on Engineering Mechanics Properties of Granite after Various Heating/cooling Treatments.