Abstract:With the rapid development of transportation in China, the number of tunnels is also increasing. However, tunnels may be affected by fire accidents during operation, and the surrounding rock will be irreparably damaged by high temperature. To investigate the influence of temperature on the physical and mechanical properties of red sandstone, physical properties were determined and the Brazilian splitting test was conducted on red sandstone after thermal treatment from 25 to 600°C. The results show that with increasing temperature, the apparent colour of the red sandstone gradually deepened. The P-wave velocity and Leeb hardness decreased with increasing temperature, and a typical temperature threshold (300°C) was identified. The tensile strength of red sandstone decreased quickly from 25 to 300°C and then decreased slowly from 300 to 600°C. The acoustic emission (AE) signal shows a high degree of consistency with the stress–time curve. As the temperature increased, the AE became more active, and when red sandstone was near failure, the AE signal increased sharply. The failure mode of sandstone mainly consists of a throughgoing main crack and a secondary crack, and the crack width also grows gradually. Moreover, we observe from polarized light microscopy images that the number of fractures in the sandstone also increases as the temperature rises. The variation of physical and mechanical properties of red sandstone is closely related to microstructure. These findings demonstrate that temperature has an obvious weakening effect on the physical and mechanical properties of sandstone, and provide theoretical guidance and significant engineering information for tunnel fire restoration. Thematic collection: This article is part of the Engineering Geology and Hydrogeology of the Anthropocene collection available at: https://www.lyellcollection.org/topic/collections/engineering-geology-and-hydrogeology-of-the-anthropocene

Pore, mechanics and acoustic emission characteristics of limestone under the influence of temperature

Experimental Study on Mechanical and Porous Characteristics of Limestone Affected by High Temperature

Microscopic characteristics and thermodynamic property changes in limestone under high-temperature treatment

Experimental Study on Dynamic Mechanical Properties and Energy Evolution Characteristics of Limestone Specimens Subjected to High Temperature

Acoustic Emission (AE) Characteristics of Limestone During Heating

Experimental study on the variation of physical and mechanical of rock after high temperature treatment

Microstructural Characterization of Limestone Exposed to Heat with XRD, SEM and TG-DSC

Experimental study of the effect of high temperature on primary wave velocity and microstructure of limestone

Mechanical Properties of Limestone After High-Temperature Treatment Under Triaxial Cyclic Loading and Unloading Conditions

Pore characteristics and mechanical properties of sandstone under the influence of temperature

The Influence of Temperatures on the Mechanical Properties and Fracture Behavior of Rocks under Mixed Mode I/II Loading

Real-time permeability evolution of limestone under high temperature and triaxial stresses

Effects of liquid-nitrogen cooling on pore characteristics of high-temperature limestone based on NMR

Experimental Study on the Thermal Damage Characteristics of Limestone and Underlying Mechanism

Pore Structure Evolution and Failure Mechanism of Limestone in the Taiyuan Formation of the Ordos Basin under High Temperature

Temperature effect on microstructure and P-wave propagation in Linyi sandstone

Pore Characteristics and Permeability Changes of High-Temperature Limestone after Rapid Cooling by Dry Ice

Damage Mechanism and Heat Transfer Characteristics of Limestone after Thermal Shock Cycle Treatments Based on Geothermal Development

The impact of high temperature on mechanical properties and behaviors of sandstone

Experimental Investigation of Temperature Effects on the Physical and Mechanical Properties of Red Sandstone

Investigations of Variations in Physical and Mechanical Properties of Granite, Sandstone, and Marble after Temperature and Acid Solution Treatments