Abstract:The physical and mechanical properties of rocks change significantly after being subjected to high temperatures, which poses safety hazards to underground projects such as coal underground gasification. In order to investigate the effect of temperature on the macroscopic and microscopic properties of rocks, this paper has taken sandstone as the research object and conducted uniaxial compression tests on sandstone specimens at different temperatures (20–1000 °C) and different heating rates (5–30 °C/min). At the same time, the acoustic emission (AE) test system was used to observe the acoustic emission characteristics of the rock damage process, and the microstructural changes after high temperature were analyzed with the help of a scanning electron microscope (SEM). The test results show that the effect of temperature on sandstone is mainly divided into three stages: Stage I (20–500 °C) is the strengthening zone, the evaporation of water and the contraction of primary fissures, and sandstone densification is enhanced. In particular, the compressive strength and elastic modulus increase, the macroscopic damage mode is dominated by shear damage, and the fracture micromorphology is mainly brittle fracture. Stage II (500–600 °C) is the transition zone, 500 °C is the threshold temperature for the compressive strength and modulus of elasticity, and the damage mode changes from shear to cleavage damage, and the sandstone undergoes brittle–ductile transition in this temperature interval. Stage III is the physicochemical deterioration stage. The changes in the physical and chemical properties make the sandstone compressive strength and modulus of elasticity continue to decline, the macroscopic damage mode is mainly dominated by cleavage damage, and the fracture microscopic morphology is of a more toughness fracture. The effect of different heating rates on the mechanical properties of sandstone was further studied, and it was found that the mechanical properties of the rock further deteriorated under higher heating rates.

Temperature effect on microstructure and P-wave propagation in Linyi sandstone

Study on dynamic fracture properties of sandstone under the effect of high-temperature using large-scale sample

Physical and Mechanical Properties and Damage Mechanism of Sandstone at High Temperatures

Experimental Study on Thermal Damage and Energy Evolution of Sandstone after High Temperature Treatment

THERMAL DAMAGE OF SANDSTONE AND ACOUSTIC EMISSION BASED ON BRAZILIAN SPLITTING TEST

The impact of high temperature on mechanical properties and behaviors of sandstone

Pore characteristics and mechanical properties of sandstone under the influence of temperature

Evaluation of Thermophysical and Mechanical Properties of Sandstone Due to High-Temperature

Experimental Investigation of Temperature Effects on the Physical and Mechanical Properties of Red Sandstone

Research on Dynamic Mechanical Properties of Sandstone at High Temperature

Effects of high temperature on the mechanical behaviors of sandstone under true-triaxial unloading conditions

Thermal properties of sandstone after treatment at high temperature

Effect of oxygen on damage mechanism and mechanical properties of sandstone at high temperature

Experimental study on changes of pore structure and mechanical properties of sandstone after high-temperature treatment using nuclear magnetic resonance

Effects of high temperature and acidic solutions on the pore characteristics and mechanical properties of sandstone

Experimental Study of the Mechanical and Acoustic Emission Characteristics of Sandstone by Using High-Temperature Water-Cooling Cycles

Influence of high-temperature thermal cycles on the pore structure of red sandstone

Dynamic Splitting Experimental Study on Sandstone at Actual High Temperatures under Different Loading Rates

Preparing rock samples using high temperature heating damage method and its application

Thermal damage and mechanical properties of high temperature sandstone with cyclic heating–cooling treatment

Mechanical behavior and fracture characteristics of high-temperature sandstone under true triaxial loading conditions