Abstract:During the underground coal gasification process, a large amount of heat will be released, causing the surrounding rock in the goaf to undergo a high-temperature baking process. Therefore, it is essential to study the pyrolysis characteristics and mechanism of rocks. In this paper, the red sandstone in Linyi city of China is taken as an example. According to the results of thermogravimetric analysis in argon and air, the thermokinetic parameters are calculated by non isothermal pyrolysis kinetic model, and the pyrolysis mechanism is analyzed. The results are as follows: in argon atmosphere, when the pyrolysis temperature is less than 500 °C, the DSC curve of sandstone has no obvious change; when the pyrolysis temperature is higher than 500 °C, the DSC curve reduce obviously, which is endothermic reaction; As the pyrolysis temperature increasing, the TG curve also decreases. In air atmosphere, the exothermic reaction occurs before 450 °C, and the endothermic reaction occurs after 450 °C; after 700 °C, the mineral absorbs oxygen and gains weight, and the TG curve increases obviously. During the pyrolysis of sandstone, a series of physicochemical reactions such as the escape of bound water and crystal water (200 °C), the escape of structural water and quartz phase transition (600 °C), the decomposition of cement (800 °C), and the melting of minerals (1100 °C). When sandstone is pyrolyzed in air, a large number of oxidation reactions will take place in the clay minerals, causing the sample mass, activation energy (E) and frequency factor (A) of sandstone being larger than that of sandstone pyrolyzed in argon. And the higher the heat treatment temperature, the greater the E and A.Article highlightsThe sandstone is pyrolysis in argon atmosphere and the endothermic reaction occurs after 500 °C. In the air atmosphere, the exothermic reaction occurs before 450 °C and the endothermic reaction occurs after 450 °C.During the pyrolysis process of sandstone, the escape of structural water and quartz phase transition (600 °C) and the decomposition of cement (800 °C) need higher E.The occurrence of oxidation reaction and the increase of heat treatment temperature will make E and A increase.

Effect of oxygen on damage mechanism and mechanical properties of sandstone at high temperature

Physical and Mechanical Properties and Damage Mechanism of Sandstone at High Temperatures

The impact of high temperature on mechanical properties and behaviors of sandstone

Effects of high temperature and acidic solutions on the pore characteristics and mechanical properties of sandstone

Effects of high temperature on the mechanical behaviors of sandstone under true-triaxial unloading conditions

Temperature effect on microstructure and P-wave propagation in Linyi sandstone

Evaluation of Thermophysical and Mechanical Properties of Sandstone Due to High-Temperature

Experimental Study on Thermal Damage and Energy Evolution of Sandstone after High Temperature Treatment

Study on dynamic fracture properties of sandstone under the effect of high-temperature using large-scale sample

THERMAL DAMAGE OF SANDSTONE AND ACOUSTIC EMISSION BASED ON BRAZILIAN SPLITTING TEST

Experimental study on changes of pore structure and mechanical properties of sandstone after high-temperature treatment using nuclear magnetic resonance

Experimental Investigation of Temperature Effects on the Physical and Mechanical Properties of Red Sandstone

Pore characteristics and mechanical properties of sandstone under the influence of temperature

Influence of multiple porous structure evolution on physical–mechanical properties and damage mechanism of sandstone heated continuously/periodically with the identical heating time

Research on Dynamic Mechanical Properties of Sandstone at High Temperature

Mechanical behavior and fracture characteristics of high-temperature sandstone under true triaxial loading conditions

Thermal damage and mechanical properties of high temperature sandstone with cyclic heating–cooling treatment

The Influence of Temperatures on the Mechanical Properties and Fracture Behavior of Rocks under Mixed Mode I/II Loading

Uniaxial compression tests on red sandstone specimens after different high-temperature processing and cooling time

A study on thermal damage mechanism of sandstone based on thermal reaction kinetics

Thermal properties of sandstone after treatment at high temperature