Abstract:During the underground coal gasification process, a large amount of heat will be released, causing the surrounding rock in the goaf to undergo a high-temperature baking process. Therefore, it is essential to study the pyrolysis characteristics and mechanism of rocks. In this paper, the red sandstone in Linyi city of China is taken as an example. According to the results of thermogravimetric analysis in argon and air, the thermokinetic parameters are calculated by non isothermal pyrolysis kinetic model, and the pyrolysis mechanism is analyzed. The results are as follows: in argon atmosphere, when the pyrolysis temperature is less than 500 °C, the DSC curve of sandstone has no obvious change; when the pyrolysis temperature is higher than 500 °C, the DSC curve reduce obviously, which is endothermic reaction; As the pyrolysis temperature increasing, the TG curve also decreases. In air atmosphere, the exothermic reaction occurs before 450 °C, and the endothermic reaction occurs after 450 °C; after 700 °C, the mineral absorbs oxygen and gains weight, and the TG curve increases obviously. During the pyrolysis of sandstone, a series of physicochemical reactions such as the escape of bound water and crystal water (200 °C), the escape of structural water and quartz phase transition (600 °C), the decomposition of cement (800 °C), and the melting of minerals (1100 °C). When sandstone is pyrolyzed in air, a large number of oxidation reactions will take place in the clay minerals, causing the sample mass, activation energy (E) and frequency factor (A) of sandstone being larger than that of sandstone pyrolyzed in argon. And the higher the heat treatment temperature, the greater the E and A.Article highlightsThe sandstone is pyrolysis in argon atmosphere and the endothermic reaction occurs after 500 °C. In the air atmosphere, the exothermic reaction occurs before 450 °C and the endothermic reaction occurs after 450 °C.During the pyrolysis process of sandstone, the escape of structural water and quartz phase transition (600 °C) and the decomposition of cement (800 °C) need higher E.The occurrence of oxidation reaction and the increase of heat treatment temperature will make E and A increase.

Thermal properties of sandstone after treatment at high temperature

Evaluation of Thermophysical and Mechanical Properties of Sandstone Due to High-Temperature

The impact of high temperature on mechanical properties and behaviors of sandstone

Physical and Mechanical Properties and Damage Mechanism of Sandstone at High Temperatures

Experimental Study on Thermal Conductivity of Mixed Materials of Sand and Bentonite

Experimental study on changes of pore structure and mechanical properties of sandstone after high-temperature treatment using nuclear magnetic resonance

Pore characteristics and mechanical properties of sandstone under the influence of temperature

Experimental Study on Thermal Damage and Energy Evolution of Sandstone after High Temperature Treatment

Thermal damage and mechanical properties of high temperature sandstone with cyclic heating–cooling treatment

Temperature effect on microstructure and P-wave propagation in Linyi sandstone

Cyclic heating of saturated steam changes the surface properties of sandstone

Research on Dynamic Mechanical Properties of Sandstone at High Temperature

THERMAL DAMAGE OF SANDSTONE AND ACOUSTIC EMISSION BASED ON BRAZILIAN SPLITTING TEST

Experimental Investigation of Temperature Effects on the Physical and Mechanical Properties of Red Sandstone

Study on dynamic fracture properties of sandstone under the effect of high-temperature using large-scale sample

Influence of high-temperature thermal cycles on the pore structure of red sandstone

A study on thermal damage mechanism of sandstone based on thermal reaction kinetics

Effects of high temperature on the mechanical behaviors of sandstone under true-triaxial unloading conditions

Mechanical behavior and fracture characteristics of high-temperature sandstone under true triaxial loading conditions

Experimental Study of the Mechanical and Acoustic Emission Characteristics of Sandstone by Using High-Temperature Water-Cooling Cycles

The effects of thermal treatments on the subcritical crack growth of Pingdingshan sandstone at elevated high temperatures