Abstract:Thermal loading is an important factor that could lead to the weakening and deterioration of rock materials. Understanding the thermal properties of rocks and their evolution under different high temperatures is important in the post-fire-hazard evaluation and cultural heritage conservation. Yet it is challenging to understand the evolution of thermally-induced changes in rock properties and to quantitatively study degrees of thermal damage when samples are limited. This study investigates the effects of high temperatures (i.e., 200 °C, 400 °C, 600 °C, 800 °C, and 1000 °C) on a dolomitic marble using combined mesoscopic and macroscopic testing techniques. The test results show that increasing marble temperature led to a deterioration of physical properties (i.e., increasing open porosity and weight loss; but decreasing P-wave velocity) and mechanical properties (i.e., increasing axial strain corresponding with the peak stress; but decreasing uniaxial compressive strength, Young's modulus, and brittleness). There existed a threshold temperature of 600 °C, which marks different thermal damage mechanisms. Below the threshold, the rock deterioration was mainly caused by physical changes such as crack propagation and grain breakage, which can be characterized by mesoscopic parameters (i.e., linear crack density and mineral grain size distribution). On the contrary, when the temperature was higher than the threshold, the deterioration was caused by chemical changes, including mineral decomposition and re-crystallization, which was indicated by the changes in mineral compositions and relative atomic mass calculation. Based on the experimental results (e.g., mineralogical and physico-mechanical changes) and obtained relationships between the parameters in mesoscale and macroscale, a novel scheme for thermal damage evaluation is proposed to estimate thermally-induced changes in macroscopic parameters (e.g., Young's modulus) based on the corresponding mesoscopic parameters (e.g., particle size distribution and linear crack density).

Investigations of Variations in Physical and Mechanical Properties of Granite, Sandstone, and Marble after Temperature and Acid Solution Treatments

Effects of temperature and acid solution on the physical and tensile mechanical properties of red sandstones

Analysis of physical and mechanical behaviors and microscopic mineral characteristics of thermally damaged granite

Effects of high temperature and acidic solutions on the pore characteristics and mechanical properties of sandstone

Laboratory Investigation on Physical and Mechanical Behaviors of Granite after Heating and Different Cooling Rates

Experimental Investigation of Physical and Tensile Mechanical Properties of Granite after Different Heating and Cooling Treatments

Effect of Thermal Damage on Tensile Strength and Microstructure of Granite: a Case Study of Beishan, China

Experimental study of the influence of temperature and cooling method on dynamic mechanical properties and damage of granite

Experimental investigation on the effect of open fire on the tensile properties and damage evolution behavior of granite

Experimental investigation on physical and tensile mechanical properties of granite after different heating/cooling treatments

Experimental Investigation of Temperature Effects on the Physical and Mechanical Properties of Red Sandstone

Experimental investigation on damage characteristics and fracture behaviors of granite after high temperature exposure under different strain rates

Tensile Microcracking Behavior of Granites after High Temperature Treatment by Considering the Effect of Grain Size and Mineralogical Composition

Mesoscopic and macroscopic investigation of a dolomitic marble subjected to thermal damage

Experimental investigation on the macro- and micromechanical properties of water-cooled granite at different high temperatures

Experimental investigation on the mechanical properties of thermally damaged granite specimens containing pre‐existing holes

Thermal Damage and Acoustic Emission Characteristics of Granite Based on Brazilian Splitting Test

Influence of Cooling Speed on the Physical and Mechanical Properties of Granite in Geothermal‐related Engineering

Laboratory Investigation on Physical and Mechanical Properties of Granite After Heating and Water-Cooling Treatment

Preparing rock samples using high temperature heating damage method and its application

Micro-damage evolution and macro-degradation of red sandstone under thermal and chemical erosion conditions