Abstract:Underground rock is often subjected to the coupled action of acid sulfate, chloride ion corrosion, and external dynamic disturbance: the degree of corrosion and dynamic load can significantly affect the pore structure and mechanical behavior of rock. To quantify the microscopic pore structure changes and macro-dynamic behavior characteristics of acidified corroded sandstone, first, a mixed acidic solution of NaHSO4 and HCl with different pH values was used for immersion corrosion of sandstone; second, the pore structure of sandstone before and after corrosion was quantitatively evaluated by nuclear magnetic resonance (NMR), dynamic loading tests of corroded sandstone were conducted on an SHPB experimental system and scanning electron microscopy (SEM) was used to observe the morphology of corroded sandstone section; and finally, the mechanism of water–rock interaction and damage and fracture of acid-corroded sandstone were analyzed. The results show that, after acidizing corrosion of sandstone, the macropores increase significantly in number and volume, the boundary of the pore structure tends to be fuzzy; the effective porosity, the number of effective pores, and the total porosity increase significantly; the residual porosity, the number of residual pores, and T2 cut-off value decrease. The proportion accounted for by the elastic stage in stress–strain curves of corroded sandstone is lowered; the proportion accounted for by the plastic yield stage is increased; and post-peak rebound is diminished. With the decrease of pH value, the peak stress on acid-corroded sandstone decreases and the peak strain increases. The peak stress on corroded sandstone is negatively correlated with effective porosity and the number of effective pores, but positively correlated with residual porosity, the number of residual pores, and the T2 cut-off value. The reaction of acidic solution with sandstone minerals causes the free fluid space to increase, the bound fluid space decreases, and the number of pores increases, resulting in a decrease in the dynamic strength of acidified sandstone. The fracture of original sandstone after impact failure has no obvious directionality, and the failure mode of grain is the coexistence of intergranular fracture and trans-granular fracture. The fracture of sandstone after acidizing corrosion is obviously directional after impact damage, and the fracture form is single, which is intergranular fracture. The research results can provide a certain reference for the protection of rock engineering under acidic water chemical environment.

Micro-damage evolution and macro-degradation of red sandstone under thermal and chemical erosion conditions

Mechanical Properties and Energy Evolution of Red Sandstone Under the Influence of Acid Corrosion

Experimental Investigation on Microstructure and Surface Morphology Deterioration of Limestone Exposed on Acidic Environment

Effects of temperature and acid solution on the physical and tensile mechanical properties of red sandstones

Influence of acidic environment on damage mechanism of sandstone under different climatic temperatures

Experimental Study of Macro- and Micro-Scopic Damage in Red Sandstone under Dry and Wet Cycling

The damage mechanism and deterioration characteristics of acid-corroded sandstone: an experimental study

Effect of Dry–Wet Cycling on the Degradation Characteristics and Mechanisms of Red Sandstone

Damage Characteristics of Argillaceous Quartz Sandstone Mesostructure under Different Wetting-drying Conditions

Experimental Investigation of Temperature Effects on the Physical and Mechanical Properties of Red Sandstone

Effects of Acid Sulfate and Chloride Ion on the Pore Structure and Mechanical Properties of Sandstone Under Dynamic Loading

Experimental study on dynamic mechanical properties of chemically corroded sandstone

Macro-meso deterioration characteristics and statistical damage constitutive model for acid-corroded sandstone

An experimental investigation on the damage mechanisms of red glutenite in the Mount Wuyi cultural and natural heritage site subject to acid rain and wet-dry cycles: a macro-to-micro approach

Damage mechanism evolution of red sandstone under drying–wetting cycles: experiment and discrete element modeling

Investigations of Variations in Physical and Mechanical Properties of Granite, Sandstone, and Marble after Temperature and Acid Solution Treatments

Micro/macro physical and mechanical variation of red sandstone subjected to cyclic heating and cooling: an experimental study

Study on the Effect of Dry–Wet Cycles on Dynamic Mechanical Properties of Sandstone Under Sulfuric Acid Solution

Effects of high temperature and acidic solutions on the pore characteristics and mechanical properties of sandstone

Aging damage characteristics of acid‐etched sandstone samples

Mechanical characteristics and freeze–thaw damage mechanisms of mode-I cracked sandstone from the Three Gorges Reservoir region under different chemical solutions