Abstract:Temperature plays an important impact on rock mechanical properties. In this paper, the mechanical properties, fracture mechanism and constitutive model of marble under 20–120 °C and 15 MPa are studied. The results show marble deformation can be divided into four stages: compaction, linear elasticity, crack propagation and post-peak failure. Stress–strain curve is not obviously affected by temperature. Macroscopic fracture characteristics change from shear failure to tensile mixed failure with temperature increasing. With the increase of temperature, the strength of marble tends to decrease, indicating that temperature increase has a weakening effect on marble, and there are temperature-sensitive areas of 20–60 °C and temperature sub-sensitive areas of 60–120 °C. The elastic modulus of marble decreases and Poisson's ratio increases with increasing temperature. The energy evolution law of marble under different temperature is basically the same, which shows that before crack initiation, the energy dissipation is less, and after the damage and yielding occurs, the energy dissipation increases quickly. The energy dissipation in the failure process is mainly used for crack initiation-connection-penetration, as well as plastic deformation caused by friction and slip of cracks, and the plastic deformation and energy dissipation have good linear characteristics. The statistical damage constitutive model based on three-parameter Weibull distribution function can effectively reflect the characteristics of post-peak plastic deformation and strain softening. The weakening effect of marble at 20–120 °C is related to its internal moisture excitation. With the increase of temperature, water is stimulated to absorb and attach to the original relatively dry interface, which plays a role in lubrication. The relative motion friction resistance between solid particles or crack surfaces decreases, which leads to crack initiation and friction energy consumption reduction, changes the specific surface energy of rocks and weakens the strength of marble. The results provide a theoretical basis for predicting and evaluating the long-term stability and safety of surrounding rock of underground deep engineering in complex environment with high ground temperature and high geo-stress.

Temperature-dependent evolution of permeability and pore structure of marble under a high-temperature thermo-hydro-mechanical coupling environment

Fracture mechanism and constitutive model considering post-peak plastic deformation of marble under thermal–mechanical action

Mesoscopic and macroscopic investigation of a dolomitic marble subjected to thermal damage

Experimental Study on Whole Stress-Strain Characteristic of Marble under the Action of High Temperature

Real-time permeability evolution of limestone under high temperature and triaxial stresses

A novel true triaxial test device with a high-temperature module for thermal-mechanical property characterization of hard rocks

TEST RESEARCH ON MECHANICAL PROPERTIES OF MARBLE UNDER HIGH TEMPERATURE

Macro-meso dynamic fracture behaviors of Xinjiang marble exposed to freeze thaw and frequent impact disturbance loads: a lab-scale testing

Experimental Study on Mechanical Behaviors and Fracture Features of Coarse Marble Specimens after Thermal Shock

Permeability evolution of fractured granite after exposure to different high-temperature treatments

Thermally Driven Fracture Aperture Variation in Naturally Fractured Granites

Experimental Investigation on Permeability Evolution of Limestone Caprock under Coupled THM Processes

Investigations of Variations in Physical and Mechanical Properties of Granite, Sandstone, and Marble after Temperature and Acid Solution Treatments

Anisotropy Response Characters of Marble After High Temperature

Modelling Thermo-hydro-mechanical (THM) Effect on the Hydro-mechanical Properties of Granite in Disposal System Using an Improved Meso-structure-Based DEM Model

Assessing energy balance via seismic and mechanical observations in high temperature induced crack damage in marbles

Thermo-mechanical Coupling Characteristics of Granite under Triaxial Pressures and Ultrahigh Heating Rates

Shear Mechanical and Permeability Properties of Deep Rock Mass under Thermal-Hydraulic-Mechanical Coupling

Water Saturation Effects on Mechanical and Fracture Behavior of Marble

Experimental Study on Infrared Temperature Characteristics and Failure Modes of Marble with Prefabricated Holes under Uniaxial Compression

Experimental Study on High Temperature Effect's Influence to the Strength and Deformation Quality of Marble