Abstract:As one of the main thermal storage medium of hot dry rock geothermal resources, granite is often subject to frequent thermal shock during the geothermal exploitation. Grasping the response regularity of granite to thermal shock is of great significance to the construction and long-term reliability evaluation of enhanced geothermal system (EGS). This paper investigated the physical and mechanical properties of granite after 0∼20 thermal shocks, and discussed its internal deterioration mechanism. Combined with ANSYS numerical simulation analysis, the mechanical formation mechanism of thermal cracks that lead to the deterioration of physical and mechanical properties of granite was analyzed. The results show that the first thermal shock tends to cause the severest deterioration to both physical and mechanical properties of granite. But when the number of thermal shocks exceeds 10, the deterioration slows down. The increase in contact thermal resistance between mineral particles after cyclic thermal shock results in a decrease in the thermal conductivity of granite. The enhancement of local stress concentration effect and the increase of local bearing capacity difference of granite after cyclic thermal shock result in the decrease of peak strength and the enhancement of ductility characteristics of granite. Due to the existence of thermal cracks, the granite after cyclic thermal shock has one more path to release the energy stored during the loading process than the natural granite. Therefore, the maximum counts at the beginning of crack propagation and the entire crack propagation stage are smaller than that of the natural granite. During the thermal shock, the huge instantaneous temperature difference between the interior and exterior of granite leads to the formation of thermal stress, which increases rapidly and then disappears gradually. As a result, the interior of granite mainly bears the effect of the vertical compressive thermal stress up to 7.59 MPa, while the exterior of granite mainly bears the effect of vertical tensile thermal stress up to 9.18 MPa. The propagation of some pre-existing micro cracks with proper orientation in the interior of granite and the initiation and propagation of secondary thermal cracks on granite surface are identified as two main causes to the deterioration of the physical and mechanical properties of granite after cyclic thermal shock.

Experimental Study on Mechanical Behaviors and Fracture Features of Coarse Marble Specimens after Thermal Shock

Effect of liquid nitrogen thermal shock on structure damage and brittleness properties of high-temperature marble

Tensile Microcracking Behavior of Granites after High Temperature Treatment by Considering the Effect of Grain Size and Mineralogical Composition

Thermal Acoustic Emission Characteristics and Damage Evolution of Granite under Cyclic Thermal Shock

Numerical Study on Failure Mechanism and Acoustic Emission Characteristics of Granite after Thermal Treatment

The Influence of Temperatures on the Mechanical Properties and Fracture Behavior of Rocks under Mixed Mode I/II Loading

Mesoscopic and macroscopic investigation of a dolomitic marble subjected to thermal damage

Fracture mechanism and constitutive model considering post-peak plastic deformation of marble under thermal–mechanical action

Thermal Shock Effect on Acoustic Emission Response During Laboratory Hydraulic Fracturing in Laizhou Granite

Experimental comparison of mechanical properties and fractal characteristics of geothermal reservoir rocks after different cooling treatments

Acoustic emission characteristics of a fine-grained marble with different thermal damages and specimen sizes

Experimental study of the influence of temperature and cooling method on dynamic mechanical properties and damage of granite

Multiscale damage and thermal-stress evolution characteristics of rocks with thermal storage potential under thermal shocks

Assessing energy balance via seismic and mechanical observations in high temperature induced crack damage in marbles

Thermal effects on prediction accuracy of dense granite mechanical behaviors using modified maximum tangential stress criterion

Experimental and numerical simulation study on the evolution of mechanical properties of granite after thermal treatment

An investigation on the deterioration of physical and mechanical properties of granite after cyclic thermal shock

Experimental Study on Whole Stress-Strain Characteristic of Marble under the Action of High Temperature

Laboratory Investigation on Physical and Mechanical Behaviors of Granite after Heating and Different Cooling Rates

Investigations of Variations in Physical and Mechanical Properties of Granite, Sandstone, and Marble after Temperature and Acid Solution Treatments

Effect of thermal shock on laboratory hydraulic fracturing in Laizhou granite: An experimental study