Abstract:The double-wall structure has attracted wide attention, especially in the cooling design of the turbine vane, because of its excellent cooling performance. However, extreme flow resistance becomes the main obstacle limiting the application of double-wall structure. Previous studies focus on further improving the cooling performance of the impingement/effusion cooling system, and few improved schemes have been made to reduce the flow resistance. In this paper, a novel cooling structure with hollow pin fins is proposed, which takes into account both the improvement of the cooling effect and the reduction of flow resistance. The three-dimensional steady-state numerical simulation obtains the film cooling effectiveness, Nusselt number, overall cooling effectiveness, and coolant flow coefficient of the novel and traditional double-wall structures. The gird uses tetrahedral elements, and the turbulence model selects the shear stress transport (SST) k-ω model for numerical calculation. The effects of different hollow pin fin arrangements on the cooling performance and flow resistance characteristics are investigated to study the novel cooling structure. The main conclusions are as follows: In terms of external cooling, placing pin fin holes near the film holes can reduce the vortex intensity and improve the film coverage. The surface-averaged film cooling effectiveness is increased by 112.5% compared to the traditional cooling structure. In internal cooling, the novel cooling structure has a more considerable spanwise distance between the impingement holes and a lower impinging jet velocity, reducing the target plate's heat transfer. However, the novel cooling structure still has excellent internal cooling owing to the increase of heat transfer area by the pin fin. The novel cooling structure maintains internal cooling and significantly improves external cooling, increasing the surface-averaged overall cooling effectiveness by up to 14.5%. In terms of coolant flow resistance, adding the hollow pin fin provides a lower total pressure loss option for coolant outflow. The novel cooling structure brings the maximum increase of flow coefficient of 32.4% and reduces the flow resistance significantly.

Optimization of Cooling Effects with Fins of Variable Cross-Sections

Numerical auxiliary study of charge-air cooler design

Natural Convection Heat Transfer along Vertical Cylinder Heat Sinks with Longitudinal Fins

Numerical Simulation and Experimental Verification on Thermal Performance of A Novel Fin-Plate Thermosyphon

Performance Analysis and Structural Optimization of a Finned Liquid-Cooling Radiator for Chip Heat Dissipation

Three-Dimensional Numerical Simulation on the Laminar Flow and Heat Transfer in Four Basic Fins of Plate-Fin Heat Exchangers

Numerical Study of Effect of Liquid Viscosity Variation on Fins Surface Performance

Optimization of Fin Geometry of a Horizontal Low-Finned Condenser Tube.

Effect of Helix-Alike Fin Surface Shape on Flow and Heat Transfer in the Internal Cooling Passage

Numerical Simulation of Heat Transfer and Flow of Cooling Air in Triangular Wavy Fin Channels

The Study of Effects of Fin Parameters on Thermal Hydraulic Performance of a Vehicular Charged Air Cooler

Research on Structural Optimi zation fo Flat-tube Fins of an Ai r-cooler

Performance Analysis and Design Optimization of Heat Pipe Sink with a Variable Height Fin Array under Natural Convection

Optimum Cooling Performance of a Multiple-Jets Impingement Cooling System by Controlling the Inlet Flow Condition

Numerical study and experimental verification of transverse direction type serrated fins and field synergy principle analysis

The Performance Simulation and Optimization on Plate Fin Oil Coolers

A TPMS-Based Hybrid Fin Design for Effective Heat Transfer Enhancement

Experimental Study of the Effects of Structured Surface Geometry on Water Spray Cooling Performance in Non-Boiling Regime

Investigation on cooling characteristic of the novel double-wall with the hollow pin fin

Airside Fin Efficiencies for Finned-Tube Heat Exchangers with Forced Convection

Enhancement mechanism on heat and mass transfer of tall fin with cycloid thermosyphon loop